Splitter Box Characteristics and Wiring

Power Supply Connection

Description

For the FTB splitter boxes, the power supply is linked using a Mini-Style 7/8" 5-pole

 

connector.

 

The FTB splitter boxes require a 24 VDC power supply.

 

 

Calculation of

the Power

Supply Cable

Cross-Section

Assembling the

Power Supply

Cable

Calculations to find cable cross-sections are made according to the system's own configuration data and remain the full responsibility of the user.

CAUTION

RISK OF EQUIPMENT DAMAGE

There are two kinds of risk of damage to equipment:

The 7/8" connector is sized for a maximum current of 8 A per pin. The pins of the 7/8" connector must be provided with adequate protection to prevent an

￿overload of more than 8 A.

Reversed polarity connections in the power supply may damage the FTB splitter box.

Failure to follow this instruction can result in injury or equipment damage.

The following diagram gives a view of the shape and size of the connection cable connector:

32

1606218 02 08/2006

Page 32
Image 32
Schneider Electric IP67 manual Power Supply Connection, Calculation Power Supply Cable Cross-Section Assembling