Installation

Method

Follow the steps below:

 

 

 

 

Step

Action

 

 

 

 

1

Position the splitter box on the support.

 

 

 

 

2

Mount the splitter box using the screws and washers.

 

 

 

CAUTION

RISK OF EQUIPMENT DAMAGE AND NON-COMPLIANCE WITH IP67. Unused connectors must not be left unprotected. If a connector is not correctly connected to the end of another connector or to a standard cable, fit a sealing plug in order to ensure that the product is IP67 standard compliant. To ensure the IP67 protection index, check that the cover is screwed onto the base splitter box and that all connectors are fitted with cables or sealing plugs.

Failure to follow this instruction can result in injury or equipment damage.

20

1606218 02 08/2006

Page 20
Image 20
Schneider Electric IP67 manual Method, Follow the steps below, Step Action