Installation

Method for Plastic Units

Follow the steps below to connect the ground to the unit:

Step

Action

1Remove the label located above the symbol representing the ground.

2Insert the end of the grounding strip into the grounding terminal of the splitter box.

3Screw in the ground connection screw.

Position of the The following figure shows the position of the ground electrode on the metal boxes.

Ground

Electrode on the

Metal Unit

Note: Use a grounding strip or a conductor with a cross-section of 1 to 1.5 mm2 (AWG18, AWG16) and a length of 3 m (9.84 ft) long. The maximum recommended length for the grounding strip is 3 m (9.84 ft).

Method for Metal Units

Follow the steps below to connect the unit to the ground electrode:

Step

Action

1Crimp the lug on the ground cable.

2Screw in the lug with the ground conductor connection screw (supplied with the product).

Mounting the

Once these steps have all been completed (see table above), the product can be

Metal Unit

mounted on its support.

 

 

22

1606218 02 08/2006

Page 22
Image 22
Schneider Electric IP67 manual Method for Plastic Units, Follow the steps below to connect the ground to the unit, Mounting