BUSlink FALCON 4D manual Cutter Parts, Cutter Installation

3-4. Cutter Parts

29	Cutter Module
30	Screw (TAP 3*8) x 2pcs

[NOTE]: Please power off the printer before installing the cutter module.

[NOTE]: Do not cut self-adhesive labels! The traces of adhesive will pollute the rotary knife and impair safe operation!

3-5. Cutter Installation

1.Open the top cover by pressing the Cover Open Buttons on both sides.

2.Push the front cover piece buttons inward to open.

3.Lift/take off the front cover piece according to the direction shown in the photo.

15