3-8. Ethernet Parts
33 Ethernet Module
34 Connector Cable
35 Network Board Stand
36 Screws (MACHINE 3x6) x 2
37 Screw (TAP 3x8) x 1
<Note> Please turn power off when assembling Ethernet module.
3-9. Ethernet Installation
1.Remove screws at the bottom of the printer (refer to arrows).
2.Facing the printer, exert force on two sides of the printer and remove the middle compartment.
3.Remove the spare opening (A) at the back of the printer (refer
to Figure 1)
(Figure 1)
19