Oki JET 2500 manual Printhead Storage Box

Page 10

4.Reinstall the Print Head by aligning the hole in the Print Head with the green post on the Printer Carriage. Lower the Print Head down gently into position.

not stored in the printer or the storage box, premature failure of the Print Head will result.

6.Place the Print Head in the Print Head Storage Box and firmly click shut the box cover.

5.Move the green Cartridge Lock Lever backwards to secure the Colour Print Head. Close the Top Cover.

Printhead Storage

Box

7.Press the Cartridge Change/Clean button. The printer will prepare the cartridge for printing.

Note: The Print Head must be stored in the Print Head Storage Box when not installed in the printer. If the Print Head is

Note: If the carriage does not return home after the Cartridge Change button is pressed, try removing and reinstalling the Print Head.

10	OKIJET 2500

Image 10

Contents Okijet Energy Star Contents EnglishSafety Instructions English Control Panel Buttons and Indicators Power/Reset buttonCartridge Change/Clean button Power LEDResume/FF Button Error LED Low Ink Indicators Non-Recoverable Error flashingPrint Head Care Replacing/swapping the print head colour or black-onlyPrinthead Storage Box Press the Cartridge Change/Clean Replacing ink cartridgesPrint head storage box Cleaning the printer cover Transporting the printerAccessing printer settings Selecting Printer OptionsClearing paper misfeeds TroubleshootingSpool manager Document menuIf the trailing edge is accessible Clearing paper jamsClear multi-page paper jams Cause Power cable is damaged Problem SolvingCause No power from outlet Cause Print Head, cable or PCCause Printer is not set for local port Cause Print Head has not been correctly installedCause Carriage position error has occurred Cause Ready light is flashingCause Printer is in the Fast mode Cause Paper feed error has occurredCause An internal printer fault has occurred Cause The Print Head nozzles are blockedCause Paper jams / multifeeds Cause Paper problemCause Print Head out of alignment Cause Low inkCause The Star Wheel assembly bar has become disengaged Cause Wrong brand of Ink Cartridge installedCause Ink Cartridge not installed correctly Cause Ink Cartridge emptyCartridges and print heads Selecting and Ordering SuppliesOrdering supplies Selecting plain paper and mediaEnvelope size Speciality print mediaSelecting labels Printing system Technical DataInk jet technology Printer Specifications English Warranty Information Paper TrayWith the original box and packaging Packaging for return to a Service CentreWithout the original box and packaging Okijet Appendix a Printing on Speciality Media EnvelopesOther media Appendix B Transportation Precautions Okijet English Index Oki Systems Company Oki Systems UK Limited