Blurry, or jagged vertical lines
Cause: Paper problem.
Solution: Turn the paper over to print on the other side.
Cause: Print Head out of alignment.
Solution: • Perform Print Head alignment procedure in the printer driver. (Access via the ‘ Printer Services’ button).
•Switch to High Quality print mode in the printer driver.
Print image is clipped or off edge of print media
Cause: The selected document margins exceed the printer margins.
Solution: Adjust margins in the application as necessary.
Cause: Incorrect settings for media type and/or type in the printer driver setup.
Solution: Ensure correct selection of media size and type in the printer driver setup.
Paper is not feeding properly
Cause: Paper jams / multifeeds.
Solution: • Align the left edge of the paper with the Left Paper Guide. Adjust the Paper Guide Lever to the right edges of the paper.
•Remove paper, fan the paper then reload.
•Use new paper.
•Ensure that paper is loaded properly. Do not over load the Paper Tray.
•Make sure that only one type of paper is loaded in the tray: mixing different types of paper in the tray will cause paper jams.
•Verify use of recommended media. Refer to “Selecting and Ordering Supplies”.
Low Ink Indicators ON
Cause: Low ink.
Solution: Purchase new ink Cartridges. Ink Cartridges will soon be empty.
English
User’s Guide | 21 |