Oki JET 2500 manual Print head storage box

Page 12

Caution: Do not force fit the Ink Cartridge into the Print Head.

5.Insert the Ink Cartridge into the correct location on the Colour Print Head as shown. The Ink Cartridges and corresponding locations are colour coded and numbered.

6.Snap the Ink Cartridge into position. Close the Top Cover.

7.Press and release the Cartridge Change/Clean button. The printer will prepare the Print Head for printing.

Print head storage box

This Storage Box is designed to protect one Print Head when the other one is installed in the printer. The box will hold either the Colour Print Head or the optional Black Ink Jet Cartridge when not in use. The Print Head Storage Box can be attached to the back of the printer. If space limitations are a concern, the Print Head Storage Box can be stored elsewhere.

Print head

storage box

Note: It is strongly recommended that the Print Head be stored in the Storage Box. The Storage Box should be placed in a cool location away from direct sunlight. For best performance, once a month the Print Head should be taken out of the Storage Box, installed in the printer and a few demo prints run before being stored once again, in the Storage Box.

12	OKIJET 2500

Image 12

Contents Okijet Energy Star Contents EnglishSafety Instructions English Control Panel Buttons and Indicators Power/Reset buttonPower LED Cartridge Change/Clean buttonResume/FF Button Error LED Low Ink Indicators Non-Recoverable Error flashing Print Head Care Replacing/swapping the print head colour or black-onlyPrinthead Storage Box Press the Cartridge Change/Clean Replacing ink cartridgesPrint head storage box Cleaning the printer cover Transporting the printerAccessing printer settings Selecting Printer OptionsTroubleshooting Spool managerClearing paper misfeeds Document menuIf the trailing edge is accessible Clearing paper jamsClear multi-page paper jams Problem Solving Cause No power from outletCause Power cable is damaged Cause Print Head, cable or PCCause Print Head has not been correctly installed Cause Carriage position error has occurredCause Printer is not set for local port Cause Ready light is flashingCause Paper feed error has occurred Cause An internal printer fault has occurredCause Printer is in the Fast mode Cause The Print Head nozzles are blockedCause Paper problem Cause Print Head out of alignmentCause Paper jams / multifeeds Cause Low inkCause Wrong brand of Ink Cartridge installed Cause Ink Cartridge not installed correctlyCause The Star Wheel assembly bar has become disengaged Cause Ink Cartridge emptySelecting and Ordering Supplies Ordering suppliesCartridges and print heads Selecting plain paper and mediaSpeciality print media Envelope sizeSelecting labels Technical Data Printing systemInk jet technology Printer Specifications English Warranty Information Paper TrayPackaging for return to a Service Centre With the original box and packagingWithout the original box and packaging Okijet Appendix a Printing on Speciality Media EnvelopesOther media Appendix B Transportation Precautions Okijet English Index Oki Systems Company Oki Systems UK Limited