Oki JET 2500 manual Appendix B Transportation Precautions

Page 33

Appendix B

Transportation Precautions

The OKIJET 2500 is not designed to be a portable printer, but it may be easily moved within your home or building. If, however, transportation involves any of the conditions below, you will need to take special precautions with the colour printhead and ink cartridges to avoid potential ink leakage.

•Airplane travel

•Elevation changes greater than 300m

•Temperature changes greater than 10oC

For transport by road of one hour or less that does not involve changes in elevation or temperature greater than that stated above:

1.Press and release the Cartridge Change/Clean button. Open the printer cover and remove the colour printhead and ink cartridges as a single unit.

2.Place the printhead and ink cartridges in the storage box that came with the printer.

3.If you have a monochrome printhead, place it in the printer.

4.Press and release the Cartridge Change/Clean button again. After the printer completes its cycle, turn the printer off.

5.Remove all paper from the paper tray and output shelf areas. Disconnect all cables.

Your printer is now ready for transportation.

6.You may place the printer anywhere in the vehicle where it will be protected from movement, and vibration. For example on the floor of the rear seat.

7.Place the storage box (with the colour printhead) inside the vehicle in an area that will be kept at a comfortable temperature. (Ink leakage may occur if large rapid temperature changes are experienced).

8.As soon as possible after reaching your destination, remove the printer and storage box and place them in a location where the temperature is maintained between 15oC to 35oC.

9.Connect the printer to the AC mains.

10.Press and release the Cartridge Change/Clean button and re- install the colour printhead. If the monochrome printhead was in the printer, put it in the storage box.

English

User’s Guide

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Okijet Energy Star English ContentsSafety Instructions English Power/Reset button Control Panel Buttons and IndicatorsPower LED Cartridge Change/Clean buttonResume/FF Button Non-Recoverable Error flashing Error LED Low Ink IndicatorsReplacing/swapping the print head colour or black-only Print Head CarePrinthead Storage Box Replacing ink cartridges Press the Cartridge Change/CleanPrint head storage box Transporting the printer Cleaning the printer coverSelecting Printer Options Accessing printer settingsSpool manager TroubleshootingClearing paper misfeeds Document menuClearing paper jams If the trailing edge is accessibleClear multi-page paper jams Cause No power from outlet Problem SolvingCause Power cable is damaged Cause Print Head, cable or PCCause Carriage position error has occurred Cause Print Head has not been correctly installedCause Printer is not set for local port Cause Ready light is flashingCause An internal printer fault has occurred Cause Paper feed error has occurredCause Printer is in the Fast mode Cause The Print Head nozzles are blockedCause Print Head out of alignment Cause Paper problemCause Paper jams / multifeeds Cause Low inkCause Ink Cartridge not installed correctly Cause Wrong brand of Ink Cartridge installedCause The Star Wheel assembly bar has become disengaged Cause Ink Cartridge emptyOrdering supplies Selecting and Ordering SuppliesCartridges and print heads Selecting plain paper and mediaSpeciality print media Envelope sizeSelecting labels Technical Data Printing systemInk jet technology Printer Specifications English Paper Tray Warranty InformationPackaging for return to a Service Centre With the original box and packagingWithout the original box and packaging Okijet Envelopes Appendix a Printing on Speciality MediaOther media Appendix B Transportation Precautions Okijet English Index Oki Systems UK Limited Oki Systems Company
Top Page Image Contents