Installing the OKIPAGE 6e Software for Windows NT 4.0
✔Do not use Add Printer Wizard.
1.Turn on your computer to start Windows. Make sure the printer is turned off.
2.Insert the disc into the
3.Click Start button from the taskbar.
4.Click Run.
5.Type d:\setup (or the location of your
6.Follow the
7.Turn the printer on, then restart Windows to activate the software.
Installing the DOS Operator Panel
If you are running your printer from DOS, install the DOS Operator Panel:
1.Insert the disc into the
2.At the DOS prompt (c:>) type d: <press Enter>.
3.Type d:\ install < press Enter>.
4.Follow the
16 | Setting Up |