Epson Photo750 manual Cartridge SensorSensor, I/C Removal, Bush Holder, Sensor, I/C Removal

EPSON Stylus Photo 750 Revision A

4.2.5.12 Cartridge Sensor(Sensor, I/C) Removal

1.Remove one screw securing “Bush Holder, Sensor, I/C” to the carriage assembly, and remove it.

Screw	Bush Holder,
	Sensor, I/C

Figure 4-26. Bush Holder, Sensor, I/C Removal

2.Remove “Harness, I/C” from the clamp part of the carriage. Harness

Figure 4-27. Removing Harness

3.Release 4 hooks(2 outer hooks, 2 inside hooks), which secure “Holder, Sensor, I/C” with the carriage assembly”, and remove the “Holder, Sensor, I/C” upward.

Carriage Assembly

Engaging Hole

Engaging part of inside hook

Engaging Holes Outside Hook Inside Hook

Outside Hook

Holder Sensor, I/C

Figure 4-28. Holder,Sensor, I/C Removal

4.Release 2 hooks of the hook, which secure the sensor to the carriage assembly”, and remove the sensor and harness.

Disassembly and Assembly Disassembly 74