Epson Photo750 manual „ Never use oil and the grease other than those, Lubrication Point

EPSON Stylus Photo 750 Revision A

6.1.3 Lubrication

The type and amount of oil and grease used to lubricated the printer parts are determined based on the results of internal evaluations. Therefore, be sure to apply the specified type and amount of oil and grease to the specified part of the printer mechanism during servicing.

„ Never use oil and the grease other than those

C A U T I O N

specified in this manual. Use of different types of components can damage the component or give bad influence on the printer function.

„Never apply larger amount of lubricate than specified in this manual.

Table 6-1. Specified Lubricants

Type	Name	EPSON Code	Supplier
Grease	G-26	B702600001	EPSON
Oil	0-12	1038991	EPSON

Table 6-2. Lubrication Point

No.		Lubrication Type/Point	Remarks
	<Lubrication Point>		• Apply grease while rotating
	• Contact between “Roller, PF2 and		“Gear, 67.2”.
1		“Paper Guide, Rear”.
	<Lubrication Type> G-26		• Do not attach the grease to
	<Lubrication Amount>		the paper path.
			• Use a syringe to apply it.
	• A half turn of “Roller, PF”
	<Lubrication Point>		• Lubricate the contact points
	•	Contact points between “Paper Guide,	between the hooks on “Paper
			Guide, Front” and each roller.
		Front” and each roller:
			• Do not attach the grease to
		“Roller, PF” (1 point)
2		“Roller, Exit” (2 points)	the paper path.
	<Lubrication Type> G-26		• Use a syringe to apply it.
	<Lubrication Amount>
	• 10-mm long for “Roller, PF”
	• 2-mm long for “Roller Exit”
	<Lubrication Point>		• After lubrication, make sure
	• Contact points between the carriage		that the carriage moves
			smoothly.
		assembly and “Frame, Upper”.
			• Use a syringe to apply it.
3	<Lubrication Type> G-26
			• Use a syringe to apply it.
	<Lubrication Amount>
	• Range from the HP sensor installation
		point to the point where “Guide Plate,
		Cable” is attached.
	<Lubrication Point>		• Rotate gears after applying
	•	“Gear 67.2.”	grease to evenly distribute it.
			• Use a syringe to apply it.
	•	*Combination Gear, 16,21.6”
4
	•	“Gear, 23.2”
	<Lubrication Type> G-26

Maintenance Overview 92