Epson MP-2100 TH manual Character Tables, Ascii Table, Code

Page 14

User’s Manual

Chapter 4

Character Tables

The codes from 00h up to 7Fh are shown below:

Characters from 00h to 1Fh are “command characters” and therefore are not represented in the following tables

Image 14

Contents Capa MP-2100 TH User´s Manual 5686 . Rev.1.1 November Europe EMC and Safety Standards AppliedCE Marking North AmericaSafety Precautions Summary MP-2100 TH CommandsCommand tables Character TablesPresentation Printer DescriptionPowering UnpackingInserting the Paper Self-testing Normal Remote modeDump mode Printer head cleaning procedureTechnical Specifications Communication Interfaces Serial InterfaceParallel Interface Pin Assignments SignalParallel Interface StrobeUSB Interface Associated Signal pinType B Receptacle Signal pin Code Character TablesAscii Table Code Tabela de Caracteres Code Using The Command Summary MP-2100 TH CommandsDirect Command Control SequenceVertical Positioning Command TablesOperation Dec Hex DescriptionESC E Horizontal PositioningCharacter Types ESC FPrint Width, Character Width And Height BarcodesComand Hexadecimal Bit graphics Graphic Commands ExamplesBit Images And Graphics Parallel interface status byte Data ControlCommunication Status bit number Logic Error Status Continuous Paper 5. Firmware Bit Sensor StatusSerial interface status byte USB interface status bytes Byte Printer StatusAppendix TroubleshootingProblem Possible Cause Automatic Line Advance AppendixCutter Optional About the CutterSpecial Care MP-2100 TH CleanupCleanup of the Thermal Printing Head Use Location Drawer Activation Pin Solenoid activation for drawer openingErrors Signaling Table Error Quantity of blinks Possible CauseAnnotations Annotations Page