Epson MP-2100 TH manual EMC and Safety Standards Applied, CE Marking, Europe, North America

Page 3

MP-2100 TH · Revision 1.1

EMC and Safety Standards Applied

Product Name: MP-2100 TH

Model Name: All

*EMC is tested using an EPSON PS180 power supply

Europe:

CE marking

Safety: EN60950

North America:

EMI: FCC Class A

WARNING

Unauthorized changes or modifications on the equipment could void the certifications described in this page. Please contact your dealer for further information.

CE Marking

The printer conforms to the following Directives and Norms:

Directive 89/336/EEC

EN 55022 Class B (Conducted and Radiated emission)

EN 55024

IEC 61000-4-2 ESD

IEC 61000-4-3 Radiated immunity

IEC 61000-4-4 EFTB

IEC 61000-4-5 Surge

IEC 61000-4-6 Conducted immunity

IEC 61000-4-11 Voltage Dips

FCC CLASS A

DECLARATION OF CONFORMITY

This equipment has been tested and found to comply with the limits for a Class A digital service, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, use and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to the radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Capa MP-2100 TH User´s Manual 5686 . Rev.1.1 November North America EMC and Safety Standards AppliedCE Marking EuropeSafety Precautions Character Tables MP-2100 TH CommandsCommand tables SummaryPrinter Description PresentationUnpacking PoweringInserting the Paper Printer head cleaning procedure Normal Remote modeDump mode Self-testingTechnical Specifications Serial Interface Communication InterfacesStrobe SignalParallel Interface Parallel Interface Pin AssignmentsAssociated Signal pin Type B Receptacle Signal pinUSB Interface Character Tables Ascii TableCode Code Tabela de Caracteres Code Control Sequence MP-2100 TH CommandsDirect Command Using The Command SummaryDec Hex Description Command TablesOperation Vertical PositioningESC F Horizontal PositioningCharacter Types ESC EBarcodes Print Width, Character Width And HeightComand Hexadecimal Graphic Commands Examples Bit Images And GraphicsBit graphics Data Control CommunicationParallel interface status byte USB interface status bytes Byte Printer Status Error Status Continuous Paper 5. Firmware Bit Sensor StatusSerial interface status byte Status bit number LogicTroubleshooting Problem Possible CauseAppendix Appendix Automatic Line AdvanceAbout the Cutter Cutter OptionalMP-2100 TH Cleanup Cleanup of the Thermal Printing HeadSpecial Care Use Location Pin Solenoid activation for drawer opening Drawer ActivationError Quantity of blinks Possible Cause Errors Signaling TableAnnotations Annotations Page
Top Page Image Contents