Epson MP-2100 TH manual Safety Precautions

Page 4

User’s Manual

Safety Precautions

This section presents important information intended to ensure safe and effective use of this product. Please read this section carefully and store it in an accessible location.

WARNING:

Immediately unplug the equipment if it produces smoke, a strange odor, unusual noise or if foreign matter including water or other liquid falls into the equipment. Continued use may damage it or lead to fire *. Please contact your dealer or a BEMATECH service center for advice.

Never attempt to repair this product yourself. Improper repair work can be dangerous.

Never disassemble or modify this product. Tampering with this product may result in injury or fire *.

Be sure to use the specified power source. Connection to an improper power source may cause malfunction or fire *.

CAUTION:

Do not connect cables in ways other than those mentioned in this manual. Different connections may cause equipment damage and burning *.

Be sure to set this equipment on a firm, stable surface. The product may break or cause injury if it falls.

Do not install this equipment in locations that do not comply with the environmental requirements specified in this manual.

Do not place heavy objects on top of this product. Never stand or lean on this product. Equipment may fall or collapse, causing breakage and possible injury.

To ensure safety, unplug this product before leaving it unused for an extended period. In this case, please be sure to place a piece of paper between the platen and the paper roll, in the thermal mechanism, to avoid damage when restarting the printer.

*Note that this equipment was developed complying with international safety standards and therefore contains only limited flammability components.

4

Image 4
Contents Capa MP-2100 TH User´s Manual 5686 . Rev.1.1 November EMC and Safety Standards Applied CE MarkingEurope North AmericaSafety Precautions MP-2100 TH Commands Command tablesSummary Character TablesPresentation Printer DescriptionPowering UnpackingInserting the Paper Normal Remote mode Dump modeSelf-testing Printer head cleaning procedureTechnical Specifications Communication Interfaces Serial InterfaceSignal Parallel InterfaceParallel Interface Pin Assignments StrobeType B Receptacle Signal pin Associated Signal pinUSB Interface Ascii Table Character TablesCode Code Tabela de Caracteres Code MP-2100 TH Commands Direct CommandUsing The Command Summary Control SequenceCommand Tables OperationVertical Positioning Dec Hex DescriptionHorizontal Positioning Character TypesESC E ESC FPrint Width, Character Width And Height BarcodesComand Hexadecimal Bit Images And Graphics Graphic Commands ExamplesBit graphics Communication Data ControlParallel interface status byte Error Status Continuous Paper 5. Firmware Bit Sensor Status Serial interface status byteStatus bit number Logic USB interface status bytes Byte Printer StatusProblem Possible Cause TroubleshootingAppendix Automatic Line Advance AppendixCutter Optional About the CutterCleanup of the Thermal Printing Head MP-2100 TH CleanupSpecial Care Use Location Drawer Activation Pin Solenoid activation for drawer openingErrors Signaling Table Error Quantity of blinks Possible CauseAnnotations Annotations Page