Epson MP-2100 TH Command Tables, Operation, Vertical Positioning, Dec Hex Description, Esc @

User’s Manual

Chapter 6

Command Tables

Operation

ASCII	Dec	Hex	Description
ESC @	64	40	Initializes the printer
ESC b n	98	62	Enable (1): Status drawer sensor
			Disable (0): Status paper sensor
ESC v n	118	76	Activate drawer (n miliseconds)
			-50ms < n < 200ms
ESC w	119	77	Performs a paper cut
ESC x	120	78	Enable Dump Mode
ESC y n	121	79	Enable (1) or Disable (0). Keyboard default (1)
ESC z 1/0	122	7A	Enable automatic line feed (n=1). Disable automatic line feeed (n=0)
ESC m	109	6D	Performs a parcial paper cut

Vertical Positioning

ASCII	Dec	Hex	Description
ESC C n	67	43	Programs the page size in lines where n is the number of lines
			(single height). The standard is 12 lines (of single height).
ESC c n1 n2	99	63	Programs the page size in millimeters where Size=0,125mm*n1*n2.
ESC J n	74	4A	Performs the feeding of n*0,125mm of paper.
FF	12	0C	Feeds one page.
LF	10	0A	Feeds one line.
ESC 2	50	32	Line feed of 1/6” – default line feed
ESC 3 n	51	33	Line feed of n/144 of an inch, where n goes from 18(d) up to 255(d).
ESC f 1 n	102	66	Vertical skipping of n characters.
ESC A n	65	41	Performs the feeding of n*0,375mm of paper.

18