Epson 410 manual CMX Character Multiplier X Direction, CMY Character Multiplier Y Direction

Chapter 4 Designing Labels Using LDS

))))))))))))))))))))))))))))))))))))))))))))

Starting position definitions:

Use the following to obtain proper character placement relative to orientations and justifications.

Character Starting Positions Relative to Field Orientations and Field Justifications

Rotation		Field Orientation
0 Degrees	0 - Right justified above base-line
	1	- Left justified above base-line
	2	- Right justified below base-line
	3	- Left justified above base-line
	4	- Centered above base-line
	5	- Centered below base-line
180 Degrees	0 - Left justified below base-line
	1	- Right justified below base-line
	2	- Left justified above base-line
	3	- Right justified above base-line
	4	- Centered below base-line
	5	- Centered above base-line
270 Degrees	0 - Right justified below base-line
	1	- Right justified above base-line
	2	- Left justified below base-line
	3	- Left justified centered on base-line
	4	- Right justified centered on base-line
	5	- Left justified centered on base-line
90 Degrees	0 - Left justified above base-line
	1	- Left justified below base-line
	2	- Right justified above base-line
	3	- Right justified below base-line
	4	- Left justified centered on base-line
	5	- Right justified centered on base-line

Table 8

CMX CHARACTER MULTIPLIER X DIRECTION

Multiplies each character in the X direction. A 5 high by 3 wide character with a CMX of 2 would produce a 5 high by 6 wide character.

CMY CHARACTER MULTIPLIER Y DIRECTION

Multiplies each character in the Y direction. A 5 high by 3 wide character with a CMY of 2 would produce a 10 high by 3 wide character.

))))))))))))))))))))))))))))))))))))))))))))

410 Operators Manual 31