Epson 410 Label Support Rack, Large Paper Roll Supply Holder, CLOCK/BATTERY Backed RAM Socket

Chapter 5 Printer Commands

))))))))))))))))))))))))))))))))))))))))))))

CHAPTER 8: OPTIONS

The 410 printer has many options available to enhance the performance of the printer. Contact your sales representative for more information on these features. See Appendix B for ordering information.

8.1LABEL SUPPORT RACK

An attachment used for peel-and-dispense mode. It allows large labels to be peeled without falling down against the printer and causing a false detection of a removed label. Recommended for labels over 2" in height.

8.2LARGE PAPER ROLL SUPPLY HOLDER

A paper supply holder that allows the use of 8" diameter paper supply rolls. (No charge option if requested at time of order.)

8.3CLOCK/BATTERY BACKED RAM SOCKET

This socket fits under the primary RAM chip and adds real-time clock features to the 410 printer. It also makes the RAM battery-backed (will not loose data when the power is off). The clock only needs to be set once. See the configuration guide, section 5.3.4, for more details.

This socket also creates non-volatile Ram that survives power-down conditions. Label formats and logos can be saved in RAM for quick access. See configuration guide, Appendix C, for more details. Note if Logos or large label formats are to be stored an addition clock/battery backed socket may be required.

8.4PCX2410 SOFTWARE

This 16bit DOS PC software program converts a PCX file into an OGO file that can be downloaded to the 410 printer. The PCX or PCC file must meet the 248 X 248 pixel scale- excluding white space - for the program to create the picture. Otherwise, the graphic will begin with the first Y and X co-ordinate that contains dark pixel data, and create a window of the graphic from that point. It creates a true graphic representation (no dithering) of the PCX or PCC file. See Chapter 6 for more information on logos.

))))))))))))))))))))))))))))))))))))))))))))

410 Operators Manual 69