Epson XR510 manual Loading the Roll Paper

Page 10

2-3. Loading the Roll Paper

Notes: Be sure to use paper rolls that meet the speciﬁcations. Do not use paper rolls that have the paper glued to the core because the printer cannot detect the paper end correctly. (Turn off power switch)

1.Make sure that the printer is not receiving data; Otherwise, data may be lost.

2.Open the paper roll cover by pushing down the cover open button.

3.Remove the used paper roll core if there is one inside.

4.Insert new paper roll as shown.

Image 10

Contents Page All speciﬁcations are subject to change without notice Table of Contents Parts Identiﬁcations Setting Up the Printer UnpackingConnecting the Cables Serial Interface Interface ConnectorUSB Interface Centronics Parallel Interface Ethernet InterfaceCash Drawer Connector Loading the Roll Paper Page Baudrate selection Dip Switch SettingSerial Interface Speciﬁcation Print Density DIP-SW2USB Combo Interface Speciﬁcation Parallel Interface SpeciﬁcationCombo Serial Option Baud rate selection USB Interface SpeciﬁcationPrint Density Wi-ﬁ Speciﬁcation Ethernet Interface SpeciﬁcationEmulation CutterPaper low detect *1 Page Page Control panel Error indicatorsControl panel and other functions Control Panel ButtonSelf-test printing Please press the Paper Feed button Self TestRunning the self test CompletedHexadecimal Dump To use the hex dump feature, follow these stepsHexadecimal Dump Speciﬁcations General SpeciﬁcationsOverall dimension Auto Cutter Speciﬁcations Electrical CharacteristicsInterface Reliability Environmental RequirementsCertiﬁcation Command List RemarksGS B Page POS-X, lnc Grant Steet Bellingham, WA Support@pos-x.com