Epson XR510 manual Auto Cutter Speciﬁcations, Interface, Electrical Characteristics

Page 24

6-2. Auto Cutter Speciﬁcations

(1)	Cutting Frequency	Max. 30 cuts per minute
(2) Thickness of paper		0.065 ~ 0.1 mm
(3)	Cutter Life	1.0 million cuttings
		(if the paper thickness is between 65 and100µm)

6-3. Interface

RS232C Serial Interface, Centronics Parallel Interface(IEEE1284), USB Interface USB COMBO Interface, Ethernet Interface(10Mbps), Wi-ﬁ(802.11b)

6-4. Electrical Characteristics

(1)	Input Voltage		DC 24V ± 10%
(2)	Current Consumption		Operating: Approx. 1.5 A (at ASC∥ printing)
			Peak : Approx. 10 A
			(at print duty 100%, For 10 seconds or less)
(3)	Power Connector		Stand-by : Approx. 0.15 A
(3)	Power Connector

23

Image 24

Contents Page All speciﬁcations are subject to change without notice Table of Contents Parts Identiﬁcations Setting Up the Printer UnpackingConnecting the Cables Interface Connector Serial InterfaceUSB Interface Centronics Parallel Interface Ethernet InterfaceCash Drawer Connector Loading the Roll Paper Page Dip Switch Setting Serial Interface SpeciﬁcationBaudrate selection Print Density DIP-SW2Parallel Interface Speciﬁcation USB Combo Interface SpeciﬁcationCombo Serial Option USB Interface Speciﬁcation Baud rate selectionPrint Density Wi-ﬁ Speciﬁcation Ethernet Interface SpeciﬁcationCutter EmulationPaper low detect *1 Page Page Error indicators Control panel and other functionsControl panel Control Panel ButtonSelf Test Running the self testSelf-test printing Please press the Paper Feed button CompletedTo use the hex dump feature, follow these steps Hexadecimal DumpHexadecimal Dump Speciﬁcations General SpeciﬁcationsOverall dimension Electrical Characteristics Auto Cutter SpeciﬁcationsInterface Environmental Requirements ReliabilityCertiﬁcation Command List RemarksGS B Page POS-X, lnc Grant Steet Bellingham, WA Support@pos-x.com