Epson XR510 manual

Page 18

♣CAUTION:

When the paper is jammed with cutter, the top cover might be stuck. In this case, repeat power on and off several times.

If the top cover is still stuck, please follow the steps to release the papers from jamming.

1.Make sure the printer is turned off.

2.Take out cutter cover as shown.

3. Turn screw with drivers to a direction until paper is released from the cutter.

17

Image 18

Contents Page All speciﬁcations are subject to change without notice Table of Contents Parts Identiﬁcations Setting Up the Printer UnpackingConnecting the Cables Interface Connector Serial InterfaceUSB Interface Centronics Parallel Interface Ethernet InterfaceCash Drawer Connector Loading the Roll Paper Page Baudrate selection Dip Switch SettingSerial Interface Speciﬁcation Print Density DIP-SW2Parallel Interface Speciﬁcation USB Combo Interface SpeciﬁcationCombo Serial Option USB Interface Speciﬁcation Baud rate selectionPrint Density Wi-ﬁ Speciﬁcation Ethernet Interface SpeciﬁcationCutter EmulationPaper low detect *1 Page Page Control panel Error indicatorsControl panel and other functions Control Panel ButtonSelf-test printing Please press the Paper Feed button Self TestRunning the self test CompletedTo use the hex dump feature, follow these steps Hexadecimal DumpHexadecimal Dump Speciﬁcations General SpeciﬁcationsOverall dimension Electrical Characteristics Auto Cutter SpeciﬁcationsInterface Environmental Requirements ReliabilityCertiﬁcation Command List RemarksGS B Page POS-X, lnc Grant Steet Bellingham, WA Support@pos-x.com