Epson XR510 manual Table of Contents

Page 3

TABLE OF CONTENTS

1.	Parts Identiﬁcations		3

2.	Setting up the printer		4

	2.1	Unpacking	4

	2.2	Connecting the cables	5

	2.3	Loading the roll paper	9

	2.4	Dip switch setting	11

3.	Control panel and other functions		18

	3.1	Control panel	18

	3.2	Error Indicating	18

4.	Self Test		19

5.	Hexadecimal Dump		20

6.	Speciﬁcations		21

	6.1. General Speciﬁcations		21

	6.2. Auto Cutter Speciﬁcations		23

	6.3. Interface		23

	6.4. Electrical Characteristics		23

	6.5. Environmental Requirements		24

	6.6. Reliability		24

	6.7. Certiﬁcation		24
7.	Command List		25

Image 3

Contents Page All speciﬁcations are subject to change without notice Table of Contents Parts Identiﬁcations Unpacking Setting Up the PrinterConnecting the Cables Interface Connector Serial InterfaceUSB Interface Ethernet Interface Centronics Parallel InterfaceCash Drawer Connector Loading the Roll Paper Page Print Density DIP-SW2 Dip Switch SettingSerial Interface Speciﬁcation Baudrate selectionParallel Interface Speciﬁcation USB Combo Interface SpeciﬁcationCombo Serial Option USB Interface Speciﬁcation Baud rate selectionPrint Density Ethernet Interface Speciﬁcation Wi-ﬁ SpeciﬁcationCutter EmulationPaper low detect *1 Page Page Control Panel Button Error indicatorsControl panel and other functions Control panelCompleted Self TestRunning the self test Self-test printing Please press the Paper Feed buttonTo use the hex dump feature, follow these steps Hexadecimal DumpHexadecimal Dump General Speciﬁcations SpeciﬁcationsOverall dimension Electrical Characteristics Auto Cutter SpeciﬁcationsInterface Environmental Requirements ReliabilityCertiﬁcation Remarks Command ListGS B Page POS-X, lnc Grant Steet Bellingham, WA Support@pos-x.com