$XWR)HHG*XLGHOLQHV
When automatically feeding stacks of paper, follow these guidelines.
Do not leave paper stacked in the printer for long periods of time; longer sheets of paper may become bent or curled over time. This may cause the paper to misfeed or jam.
If your printed page contains lots of graphics, the ink on the page may be damp due to the print density. Remove the page right away and allow the ink to dry.
The capacity of the paper output tray is 20 sheets of paper. To reduce paper jams, remove paper from the output tray before the count reaches 20.
If paper curls after printing, remove it immediately; otherwise, paper jams may occur.
The platen (a roller on the inside of the printer) may become inked if you print data beyond the width of the page. If this happens, clean the platen with a soft cloth. (For details on cleaning the platen, see Chapter 4, Maintaining the Printer.)
Depending on the density of your printed pages, the ink may need time to dry. Within two to three seconds, the ink becomes smudge
zresistant.
Do not try to load paper into the sheet feeder beyond the paper limit mark on the right side of the sheet feeder; stacking too much paper may cause paper feeding or printing problems.
3DSHU+DQGOLQJ | Limit Mark |