section
Installation Procedure
1 | 10. To set up the IP address of the Print Server, the default | |
is set to “DHCP” for the TCP/IP configuration. | ||
2 |
| |
|
| |
3 |
| |
|
| |
4 |
| |
|
| |
5 |
| |
|
| |
6 |
| |
|
| |
7 |
| |
|
| |
8 |
| |
| The Print Server by default will try to get an IP | |
9 | ||
address from the connected Belkin Router running |
| the Dynamic Host Configuration Protocol (DHCP) |
10 | server and the following screen will appear. |
| |
11 |
|
The newly assigned TCP/IP settings will be displayed in the “TCP/IP Configuration” window for your reference. Click “Next” to continue on to step 3 in the installation process.
16