Belkin F1UP002 Search for All-In-One Print Server, Start Control, Manager on, Windows startup

section

All-In-One Print Manager

1

2	General Setting
	Start Control	Executes the Belkin All-In-One Print
3	Manager on	Manager when Windows starts every time.
	Windows startup	By default, it is enabled.

4Minimized when start Minimizes the Belkin All-In-One Print

Control Manager Manager to an icon in the system tray

	when you start the Belkin All-In-One Print
5	Manager. By default, it is disabled.
	Refresh status every Sets up the refresh interval for device-

6xx seconds. (5~300) status update. By default, it is disabled.

	Your Contract	Enter your contact information here. When
7
	Information	you connect to the printer, your contact
		information will be displayed in the right
8		side of the program for other users to
		contact you.

9 Search for All-In-One Print Server

	If the Print Server is not in the network as your computer, you can
10
	enter the IP address of the Print Server to do the remote search. The
	Print Server in the Remote MFP Server List will be added to the Print
11	Server List for you to configure.

44