Belkin F1UP002 manual System Configuration

Print Server Manager

System Configuration

Double-click the “System” icon and the “System” configuration window pops up.

In the System configuration page, you can see all available printing protocols and upgrade the new firmware for this Print Server.

Upgrade Firmware: You can use this “Upgrade Firmware” tool to update the newest firmware of the Print Server. Click the “...” button and select the correct firmware in your computer. After selecting the firmware file, click the “Upgrade” button to finish the firmware- update process.

Tip: Before you upgrade the firmware, make sure that the IP-address settings of the Print Server are in the same network as your computer.

Load Default: If you want to reset the Print Server to default factory settings, click “Load Default”.

1

2

3

4

5

6

7

8

9

10

11

section

55