Belkin F1UP002 manual Auto Connect List

All-In-One Print Manager

“My Favorite” List

“My Favorite”	The “My Favorite” list will show your favorite
List	Print Servers. You can find the Print Server’s
	information including its name, MAC ID, IP
	address, and any connected devices.
All-In-One	The information listed here is the same as the Print
Print	Server List. Refer to the “Print Server List” section
Server/MFP	for more information.
Information
Refresh	Refreshes the Print Server List immediately.
Connect	Allows printer connection to your computer.
Disconnect	Disconnects the selected MFP.
Delete	Deletes the selected Print Server from the “My
	Favorite” list.
Auto Release	To avoid occupying the printer for too long, you
when idle	can set up an idle-timeout setting. It is used
time is over	to disconnect the current connection after the

xxminutes printer is idle for a specified period of time.

(5–255)	By default, there is no timeout setting. We
	recommend that you enable an idle-timeout
	setting after the printer and Print Server are
	installed completely so that the printer resource
	will not be occupied easily.

1

2

3

4

5

6

7

8

9

10

11

section

Auto Connect List

To let the system occupy the Print Server automatically when you want to print a document, just like the behavior of using a traditional print server, you can add the printer into your Auto Connect List. The system will send the printing jobs to the printer when the Print Server is idle and there is no connection.

39