Belkin F1UP002 manual Ad-Hoc Mode

Print Server Manager

Ad-Hoc Mode:	1
	2
	3
	4
	5
	6
In the Ad-Hoc mode, you can allow the Print Server to automatically	7
associate with another wireless station, or you can manually assign
the SSID of your wireless network. You can allow the Print Server	8
to automatically select the channel that is the same as the wireless
station with which you want to connect, or you can manually assign a
	9
channel.
If you select to
	10
allow the Print

Server to scan

for an active	11
wireless station,
the following
window will pop
up
The list shows
the scanned
active wireless
stations. Select a
wireless station
from the list and
click “Next”. If you cannot find the wireless station with which you
want the Print Server to communicate, click “Scan” to allow the Print
Server to scan again.

section

59