Section 4: Setting Up - Windows
Windows for Workgroups
Setup for Follow these steps to install your AXIS 540/640 for
1.
2.In the Port menu, click Add.
3.In the NPS Port list, select the AXIS 540/640 port to be installed. The port will appear as <name>.LP1, where <name> is AX followed by last six digits of your print server number
e.g. AX100086.LP1. However, this alphanumeric name will be superseded by any new name given to your AXIS 540/640 when using AXIS NetPilot.
4.Accept or change the suggested Windows port name and type any required comment in the Description field. Make a note of the Windows port name as you will need this later, then click OK to install the Windows port.
5.In the Port menu, click Connect... to bring up the Windows Printers dialog.
6.Select a printer driver from the list of Installed Printers (or click Add>> to install a new driver), then click Connect...
7.Select the Windows port name from step 4 above (this name can be found at the bottom of the Ports list).
8.Click OK to close the Connect dialog, and Close to close Printers.
The setup is completed and you can now print through your
AXIS 540/640.
Note: ❏ AXIS Print Utility for Windows must be running when you print through your AXIS 540/640. We strongly recommend that you copy the AXIS Print Utility icon into your StartUp folder.
48 | AXIS 540/640 User’s Manual |