Axis Communications 540/640 manual Setting Up Windows

Page 55

Section 4: Setting Up - Windows

Install the TCP/IP In the Control Panel, click the Network icon. If the TCP/IP Printing Protocol Stack entry appears, then TCP/IP is already installed. Close the Network

folder and skip to Installing a Printer below.

Follow these steps to install the TCP/IP protocol stack:

1.In the Control Panel, select Network.

2.Click Add Software..., select “TCP/IP Protocol and related components” and click Continue.

3.Check the “TCP/IP Network Printing Support” and click Continue.

4.Select path and then click Continue.

5.Click OK in the Network Settings dialog box.

Installing a Printer Proceed as follows to install a printer for LPD printing.

1.In the Control Panel, click the Print Manager.

2.In the Printer menu, select Create Printer.

3.In the Printer Name field, type a name for your printer.

4.Choose a printer driver suitable for your printer.

5.In the Print to field, select Other...

6.In the Print Destinations dialog, choose LPR Port, then click OK. The Add LPR Compatible Printer dialog now appears.

7.In the Name or Address field, type the IP address or the alias name of your AXIS 540/640.

Note: If you use an alias name, this must be defined in the hosts file on your server prior to the installation. This file is normally located in /winnt35/system32/drivers/etc/hosts.

8.In the Name of Printer on the Machine field, type the logical printer number you want to use, e.g. pr1. Click OK.

9.Click OK to complete the installation.

AXIS 540/640 User’s Manual

55

Image 55

Contents About Axis PrefaceAbout this manual Trademark acknowledgements Electromagnetic Compatibility EMC noticesTable of Contents 105 Appendix aAppendix B Appendix CIntroduction How it Works Web Where to use it Nprinter Windows Environments OS/2 Environments Unix EnvironmentMain Features Introduction Introduction Checking and Identifying the Hardware Basic InstallationOptional accessories Axis 540/542 Connectors STP Axis 640/642 ConnectorsConnecting Printers to the Axis 540/640 Connecting the Axis 540/542 to the Ethernet Network Connecting the Axis 640/642 to the Token Ring Network Basic Set Up with Axis NetPilot, on Setting Up NetWare Basic Set Up of the NetworkWeb Based Management Basic Set Up with Axis NetPilot Environment Basic Installation Before you start Basic Set Up for TCP/IPYour Host Table Host NameBasic Installation Axis 540/542 Ethernet Print Server Axis 640/642 Token Ring Print Server Type the following command Arp -s ether host name 00408c100086 temp Node address host name Example for Axis 540/542 /Ethernet Using Dhcp in Windows Set Up using the Axis NetPilot Setting Up NetWarePrint Servers Axis NetPilot NetWare Network Environment window Axis NetPilot Connect NetWare Print Queues window Property Page showing general parameters to be set Limitations AdvantagesAxis NetPilot’s Monitoring Window Other NetWare Configuration Methods NetWare Print Layout with corresponding summary information Axis 540+/542+ NetWare Configuration Installation Using Axis Print Utility for Windows Setting Up WindowsSetting Up Windows Windows Windows for Workgroups Setting Up Windows Setting Up Windows Windows Setting Up Windows Windows NT Windows NT LPD Printing Setting Up Windows Other Windows Configuration Methods Installation Using Axis Print Utility for OS/2 Setting Up OS/2Axis 540/640 User’s Manual Create a Print Queue OS/2 version OS/2 Warp Integrating your Axis 540/640 into the OS/2 EnvironmentSetting Up OS/2 Other OS/2 Configuration Methods Setting Up OS/2 Installation Using the Chooser Window Setting Up MacintoshChoosing a Printer Setting Up Macintosh Setting Up Macintosh Binary YES Binarytype Tbcp Other Macintosh Configuration MethodsAxis 540+/542+ AppleTalk Configuration Installation in the Unix Environment Setting Up UnixFtp salesdept Sh axinstall Advantages Print Methods on TCP/IP NetworksPros a Limitations Reverse Telnet Other Unix Systems OS/2 Systems Logical Printer Changes to data Result PR5AFT PR1STR 0A 02 0D 0A PR1FILT. None PR2FILT. Postscr PR3FILT. Autops PostScript conversion on Read-back of information Telnet salesdept Trying Using Telnet with the Axis 540/640Root account Status using Telnet Using Snmp for Remote Monitoring Setting Up Unix Other Unix Configuration Methods Setting Up Unix Web Based Management Accessing the Web Pages Axis 540/542 Home Enhanced Http Management Services Axis 540/640 User’s Manual Web Based Management Appendix a The Test Button Axis 540/640 User’s Manual Appendix B The Parameter List Editing the Configuration ParametersPut config Config Net Mask e.g .255.255.0 for class C, 0.0.0.0 for auto-sense Config File100 Axis 540/640 User’s Manual 101 102 Axis 540/640 User’s Manual 103 104 Appendix C Updating the Software Obtaining the Updated SoftwareUpgrading the Software Software UpgradeNetwork using FTP 108 Hardware Appendix D Technical SpecificationsSupported Systems Supported ProtocolsAttachments Logical ConnectionSecurity Approvals 112 Appendix E How To Contact Axis Axis Communications AB Axis OfficesSoutheast Asia, 51 Thomson Road Japan Axis Communications K.K116 Defrout IndexNetmask Axis 540/640 User’s Manual 119