Brady 1024 manual Label-Formatting Commands, Description Format

A STX L Command switches the Printer from the System Level to the Label-Formatting Mode. All command characters after STX L are interpreted as Label Formatting Commands until the Label Formatting mode is terminated with the command character E. All Label Formatting Commands are terminated with hex value 0D.

CC	Description			Format
:	Set cut by amount (4 digits)	:nnnn
	The cutter function will perform a cutting	nnnn = 4 digits of labels printed
	action after the number of labels specified.	before cut. Default = 0001
A	Set format attribute	An n=1-XOR, 2-Transparent, 3-
		Opaque, 5-Inverse
C	Set column offset amount	Cnnnn nnnn= in/100 or mm/10
c	Set cut by amount (2 digits)	cnn nn = 2 cut amount
D	Set height and width dot size	h = Horiz. dot size; can be 1 or 2
		v = Vert. dot size; can be 1,2, or 3
		(0.005" steps) Default is “D22”
E	Terminate field generation and print label
G	Place data in global register
H	Enter heat setting	Hnn nn = 2 digits. 1 - 30
	(The amount of heat applied per dot row, can	10 is nominal and default
	be used to help control print quality)
m	Set metric mode	The Printer must be reset in
		order to return to standard
		measure
M	Set mirror image mode	'M' must be re-sent to cancel.
	('Mirror Images' current formatted label)	* Will not mirror polygons.
P	Print speed	Px	x	x = A -C (1.0 to 2.0 ips)
p	Set label backup speed	px	x	x = A -C (1.0 to 2.0 ips)
Q	Enter quantity of labels to print	Qnnnn		nnnn = quantity
R	Set row offset amount	Rnnnn nnnn = in/100 or mm/10
r	Recall stored label format	rnn...n nn...n Label name of up
		to 16 char. terminated by CR.
S	Slew (feed) speed	Sx	x	x = A -C (1.0 to 2.0 ips)
s	Store label format in module	sann...n		a - destination module
				A Memory Module A
		nn...n - label name (16 char.
		max)
T	Set field data line terminator	Tnn nn = 2 digit ASCII Hex
				00 - FF
U	Make previous field a string replace field

Table 2-4 Label-Formatting Commands

Printing Labels 21