Brady 1024 manual Configuration Command String, STXKDwxy CR where w, Example

2.3Configuration Command String

The Configuration Command String sets the operating parameters of the Printer. The Command Strings are described below.

<STX>KDwxy <CR> where w:

Bit #	Function	Value
0-2	Baud Rate	0=9600, 1=600, 2=2400, 3=19200, 4=4800, 5=N/A,
		6=1200, 7=9600 Test Mode
3	Word Length	0=8 bits, 1=7bits
4&5	Unused	Set to 0
6	Always 1	Set to 1
7	Always 0	Set to 0
where x:
Bit #	Function	Value
0	Print Method	0=direct, 1=transfer
1	Present Sensor	0=not equipped, 1=equipped
2	Alternate Char.	0=standard, 1=main frame
	Set
3	Cutter	0=disabled, 1=enabled
4&5	Unused	Set to 0
6	Always 1	Set to 1
7	Always 0	Set to 0
where y:
Bit #	Function	Value
0&1	Paper Type	0=gap(edge), 1=reflective, 2=continuous (3")
2	Linerless	0=not equipped, 1=equipped
3-5	Unused	Set to 0
6	Always 1	Set to 1
7	Always 0	Set to 0

Example:

<STX>KD @A@ <CR>

@Sets the Printer to: 9600 baud; 8 bit word length/no parity.

ASets the Printer to: thermal transfer; no present sensor; standard character set; no cutter.

24 Printing Labels