Siemens E-110-I user manual View System Alarms, Diagnostics

Chapter 4: Advanced Configuration

View System Alarms

1.To display the Alarm page, select Admin > Alarm.

Each row in the table displays the time and date that an alarm occurred, the type of alarm, and a brief statement indicating its cause.

2.You can click on the Refresh Rate drop-down list to select a recurring time interval after which the page will redisplay with new data.

Diagnostics

1.To perform diagnostics on specific ATM VC, select Admin > Diagnostics.

2.From the WAN Interface drop-down list, select the interface on which you want to execute diagnostics. Note that only the interfaces defined in the system will appear on the drop-down list.

3.Click [Start Test]. The diagnostic result will displayed on this page.

Rev:01_040220 67