Siemens E-110-I Problem Troubleshooting Suggestion, Upgrading Error Message Possible cause Action

Page 86

SIEMENS ADSL E-110_E-110-I user manual

Problem

Troubleshooting Suggestion

Cannot access the Configuration

Use the ping utility to check whether your PC can communicate with

Manager program from your

the ADSL Router’s LAN IP address (by default 192.168.1.1). If it cannot,

browser.

check the Ethernet cabling.

 

Verify that you are using Internet Explorer v5.0 or later, or Netscape

 

Navigator v4.7 or later. Support for Javascript® must be enabled in

 

your browser. Support for Java® may also be required.

 

Verify that the PC’s IP address is defined as being on the same subnet

 

as the IP address assigned to the LAN port on the ADSL Router.

 

 

Changes to Configuration

Be sure to use the Commit function (Admin > Commit & Reboot) after

Manager are not being retained.

any changes.

Upgrading

Error Message

Possible cause

Action

invalid checksum

The firmware file to be used is

Make sure that your firmware file format is

 

damaged or the file format is wrong.

valid or get a new firmware file.

 

 

 

invalid hardcode

The firmware file is not compatible

Download a compatible firmware from the

 

with the model of your ADSL Router.

Web.

 

 

unknown flags type

The firmware version is not compatible. Download a compatible firmware from the

 

 

Web.

 

 

 

internal isfs error /

System error occurs. It may cause by

Reboot your ADSL Router and perform the

internal flashfs error

the lack of memory.

upgrade task again.

invalid file format

The firmware file format is invalid.

Check the file format is correct, otherwise download a firmware file with correct format.

get an error message The TFTP server responses with error message.

Make sure the file name you enter is correct. Otherwise the TFTP server may response with the error message “File not found”.

transfer time out

The transfer session is interrupted.

a. Make sure the TFTP server is on the

 

 

 

same subnet with the ADSL Router.

 

 

b.

Make sure you the IP address of the

 

 

 

TFTP server you specify is correct and

 

 

 

that your TFTP server is started.

 

 

c.

If error still occurs, reboot your ADSL

 

 

 

Router and perform the upgrade task

 

 

 

again.

 

 

 

firmware update in

The upgrade is already in process

Do not turn off your ADSL Router

process

 

otherwise you will cause damage to the

 

 

device

 

 

 

no remote server IP

The IP address of the TFTP server is not

Specify the IP address of the TFTP server is

 

specified

not specified.

 

 

 

can’t allocate update

It may cause by the lack of memory.

Reboot your ADSL Router and perform the

buffer

 

upgrade task again.

 

 

 

 

80

Rev:01_040220

Image 86
Contents Siemens Adsl E-110/E-110-I For Using Safety NotesFor Installation For ServiceContent IiiRIP Configuration Advanced Configuration via Web browserNAT Configuration Administration TasksContents Appendix SpecificationPage Features Before You UseUnpacking Configuration and ManagementSystem Requirements Physical Outlook LED Indicators Front Panel System MessagesOverview Front Panel9V 1A Rear PanelRear PanelEthernet Analog Pstn installation InstallationConnecting the Adsl Router Choosing a place for the Adsl RouterIsdn installation Isdn NTUSB driver installation Install the USB driverUninstall the USB driver Click Start Programs Siemens DSL Modem UninstallFor Windows ConfigurationConfigure TCP/IP on Client PC Page Rev01040220 Page For Windows 98 and Windows 98 SE Your network interface card When returning to Network window, click OK Rev01040220 Page For Windows ME For Windows NT Page Page Page For Windows Page Page For Windows XP Click Internet ProtocolTCP/IP and then click OKFor Macintosh OS 8.6 For Macintosh OS From the Apple Menu, select System Preferences…Close the Network window Renew IP Address on Client PC For Windows ME For Windows Click Connect and Save Quick Configuration via Web browserInternet Access Advanced Configuration via Web browser Main Menu Commonly Used Buttons and IconsViewing Basic System Information Quick Configuration Rebooting the device using Configuration Manager Committing Changes to Permanent StorageSub-Menus DSLNAT Advanced Configuration Configuring IP RoutesPart 1. Creating IP address pools Dhcp ConfigurationConfiguring Dhcp Server Part 2. Enabling Dhcp Server Mode Viewing Current Dhcp Address Assignments Part 3. Configuring your PCs as Dhcp clientsModifying Address Pools Select Lan Dhcp ServerPart 1. Defining the Dhcp relay interfaces Configuring Dhcp RelayPart 2. Enabling Dhcp relay mode These private IP addresses Are translated to NAT ConfigurationViewing Your NAT Configuration FieldDescription Page Field Description Viewing NAT Rules and Rule StatisticsViewing Current NAT Translations Adding NAT Rules Rdr rule Allowing external access to a LAN computer Basic rule Performing 11 translations Bimap rule Performing two-way translations Page Select a Send Mode and a Receive Mode RIP ConfigurationConfiguring the RIP Viewing RIP Statistics Firewall Configuration Firewall, IP Filters and Blocked ProtocolsMax Icmp Conn Mail ID of Admin 1/2/3Field Description Max Half open TCP Conn Max Single Host ConnConfiguring IP Filter Global Settings IP Filter ConfigurationViewing Your IP Filter Configuration Action Creating IP Filter RulesField Description Rule ID DirectionLog Tag Field Description Log OptionSecurity Level Start/End TimeIcmp Type Field Description Dest PortTCP Flag Icmp CodeIP filter rule examples Specify Protocol eq TCPViewing IP Filter Statistics To Block Specific Protocols Managing Current IP Filter SessionsChanging Your Login Password Administration TasksUser Configuration Changing the System Date and TimeAdding a New User Image UpgradeSelect Admin Local Image Upgrade View System Alarms DiagnosticsPort Settings View DSL Parameters Page Connection Modes Bridge ModePart 1 Configuring the Adsl Router Creating an ATM VCC interfaceMux Type Creating an EoA interfaceField Description VC Interface Max Proto per AAL5Select Bridge LAN Config Enable Bridging functionLAN configuration Part 2 Check your connection status PPP Connection ModePart 3 Configuring the PC Commit your changesInterface Sec Type Select Public Creating a PPP interfaceSelect the ATM VC you created, e.g. aal5-0 Password Service NameLogin Name Field Description Status Select Start or StartOnDataRouter Connection Mode Creating a IPoA interface Internet Access TroubleshootingProblem Troubleshooting Suggestion LEDs Configuration Manager ProgramProblem Troubleshooting Suggestion Upgrading Error Message Possible cause ActionGlossary UDP User Datagram Protocol PVC Permanent Virtual CircuitRIP Routing Information Protocol Virtual ServerAppendix Specification SoftwareRegulatory Approvals and Compliance Power Requirement and Operation Environment RequirementHardware Physical