SpeedStream Powerline Wireless Router User Guide
Wireless Station Configuration
The SpeedStream Powerline Wireless Router is configured to work seamlessly with other SpeedStream wireless products right out of the box.
You may need to reconfigure some wireless settings to ensure that all settings match between wireless devices in the following situations:
∙You are also using another manufacturer’s wireless products
∙The SpeedStream Powerline Wireless Router is being installed in an existing wireless network.
Note:
∙Mismatched Wireless settings will prevent successful Powerline network connections between devices.
∙The default Wireless settings are listed below. To use the Wireless Access Point in the SpeedStream Powerline Wireless Router, each Wireless Station must have compatible set- tings.
Mode | On each PC, the mode must be set to Infrastructure. |
|
|
SSID (ESSID) | This must match the value used on the SpeedStream Powerline Wireless |
| Router. The default value is SpeedStream |
| Note! The SSID is case sensitive. |
|
|
WEP | By default, WEP on the SpeedStream Powerline Wireless Router is |
| disabled. |
| ∙ If WEP remains disabled on the SpeedStream Powerline Wireless |
| Router, all stations must have WEP disabled. |
| ∙ If WEP is enabled on the SpeedStream Powerline Wireless Router, |
| each station must use the same settings as the SpeedStream Power- |
| line Wireless Router. |
|
|
40