Advanced Configuration
Figure 42: Routing Screen
Data - Routing Screen
RIP
Enable RIP | Check this to enable the RIP (Routing Information Protocol) feature |
| of the SpeedStream Powerline Wireless Router. |
| The SpeedStream Powerline Wireless Router supports RIP 1 only. |
|
|
Static Routing |
|
|
|
Static Routing | This list shows all entries in the Routing Table. |
Table Entries | ∙ The "Properties" area shows details of the selected item in the |
| |
| list. |
| ∙ Change any the properties as required, then click the "Update" |
| button to save the changes to the selected entry. |
|
|
Properties | ∙ Destination Network - The network address of the remote LAN |
| segment. For standard class "C" LANs, the network address is |
| the first 3 fields of the Destination IP Address. The 4th (last) |
| field can be left at 0. |
| ∙ Network Mask - The Network Mask for the remote LAN |
| segment. For class "C" networks, the default mask is |
| 255.255.255.0 |
| ∙ Gateway IP Address - The IP Address of the Gateway or |
| Router that the SpeedStream Powerline Wireless Router must |
| use to communicate with the destination above. (NOT the router |
| attached to the remote segment.) |
| ∙ Metric - The number of "hops" (routers) to pass through to |
| reach the remote LAN segment. The shortest path will be used. |
77