Appendix A
Troubleshooting
A
This Appendix covers the most likely problems and their solutions.
Overview
This chapter covers some common problems that may be encountered while using the Speed- Stream Powerline Wireless Router and some possible solutions to them. If you follow the suggested steps and the SpeedStream Powerline Wireless Router still does not function prop- erly, contact your dealer for further advice.
General Problems
Problem 1: Can't connect to the SpeedStream Powerline Wireless Router to con- figure it.
Solution 1: Check the following:
∙The SpeedStream Powerline Wireless Router is properly installed, LAN connections are OK, and it is powered ON. Check the LEDs for port status.
∙Ensure that your PC and the SpeedStream Powerline Wireless Router are on the same network segment. (If you don't have a router, this must be the case.)
∙If your PC is set to "Obtain an IP Address automatically" (DHCP client), restart it.
∙If your PC uses a Fixed (Static) IP address, ensure that it is using an IP Address within the range 192.168.254.1 to 192.168.254.253 and thus compatible with the SpeedStream Powerline Wireless Router's default IP Address of 192.168.254.254.
Also, the Network Mask should be set to 255.255.255.0 to match the SpeedStream Powerline Wireless Router.
In Windows, you can check these settings by using Control Panel- Network to check the Properties for the TCP/IP protocol.
Internet Access
Problem 1: When I enter a URL or IP address I get a time out error.
Solution 1: A number of things could be causing this. Try the following troubleshoot- ing steps.
∙Check if other PCs work. If they do, ensure that your PCs IP settings are correct. If using a Fixed (Static) IP Address, check the Network Mask, Default gateway and DNS as well as the IP Address.
∙If the PCs are configured correctly, but still not working, check the SpeedStream Powerline Wireless Router. Ensure that it is connected and ON. Connect to it and check its settings. (If you can't connect to it,
82