Siemens SS2524 manual Installation

Page 11

Installation

2.Use Cat 5 Ethernet cable(s) to connect PC(s) to the hub ports on the SpeedStream Power- line Wireless Router. If desired, any port can also to be connected to a standard port on another hub.

3.Connect your DSL/Cable modem to the WAN port on the SpeedStream Powerline Wire- less Router using the Ethernet cable supplied with your DSL/Cable modem. If no cable was supplied with your modem, use a straight-through CAT 5 Ethernet cable.

4.Attach the wireless antenna to the connector provided on the back of the router. Secure the antenna by turning the grooved or ridged ring on the antenna until snug (Do not over tighten).

5.Connect the supplied power cord to the SpeedStream Powerline Wireless Router.

The SpeedStream Powerline Wireless Router has built-in surge protection. It is not recommended to plug the router into a power strip, surge protector or UPS as the Powerline connection speed and quality will be affected.

6.Check the LEDs:

∙The Status LED should flash, then turn Off.

∙The Power, WAN, Powerline and Wireless LEDs should be ON.

∙For each active LAN (PC) connection, the LAN Link/Act LED should be ON.

For more information, refer to Front Panel LEDs in Chapter 1.

7

Image 11

Contents SpeedStream Page Table of Contents Security Overview General Problems Internet AccessSpeedStream Powerline Wireless Router Introduction FeaturesInternet Access Features Advanced Internet Functions Wireless FeaturesLAN Features Package Contents Front Panel LEDs Physical DetailsRear Panel Requirements InstallationProcedure RequirementsInstallation To Do this Refer to SetupOverview Setup Using your Web Browser Configuration ProgramConnecting to the SpeedStream Powerline Wireless Router Using UPnPIf you cant connect Data Details Check Setup WizardCable Modems Setup Connection Details Data Required Type DSL ModemsOther Modems e.g. Satellite Broadband Navigation & Data Input Home ScreenButtons LAN ScreenData LAN Screen What Dhcp Does Using another Dhcp ServerTo Configure your PCs to use Dhcp Mode Wireless ConfigurationWireless Screen DisabledOptions Data Wireless ScreenIdentification Access Point WEP Data Encryption WEP ScreenData WEP Screen Passphrase Powerline Screen Powerline ConfigurationOther Stations Data Powerline ScreenPowerline Data Encryption PasswordPassword Dialog Password ScreenWindows Clients PC ConfigurationTCP/IP Settings Overview Using Specify an IP Address Checking TCP/IP Settings Windows 9x/MEUsing Dhcp Gateway Tab Windows NT4.0 TCP/IP Checking TCP/IP Settings Windows NT4.0Specify an IP Address Obtain an IP address from a Dhcp ServerWindows NT4.0 Add Gateway Windows NT4.0 DNS Network Configuration Win Checking TCP/IP Settings WindowsTCP/IP Properties Win Using a fixed IP Address Use the following IP AddressNetwork Configuration Windows XP Checking TCP/IP Settings Windows XPTCP/IP Properties Windows XP For Windows XP Internet AccessAccessing AOL For Windows 9x/2000Fixed IP Address Macintosh ClientsLinux Clients Other Unix Systems∙ Ensure your DNS Name Server settings are correct Wireless Station Configuration Powerline Configuration Operation Operation and StatusInternet Status ScreenData Status Screen System Connection Log Connection Status PPPoEData PPPoE Status Screen ConnectionMessage Description Connection Log MessagesPptp Status Connection Status PptpData Pptp Status Screen DNS IP Address Default GatewayConnection Details Fixed/Dynamic IP Address Data Connection Details ScreenRelease Dhcp ClientRelease/Renew Button will displayAdvanced Internet Screen Advanced Features∙ ICQ Conferencing & TelephonySelect an Application Special ApplicationsSpecial Applications Screen Conferencing & TelephonyData Special Applications Screen Using a Special ApplicationFilter Strings URL FilterURL Filter Screen Data URL Filter ScreenAdd Add FilterString Delete/Delete AllIP Address seen by Internet Users Virtual ServersProperties Virtual Servers ScreenData Virtual Servers Screen ServersDefining your own Virtual Servers Dynamic DNS Connecting to the Virtual ServersView all Settings of all Servers Service works as followsDdns Data Ddns ServiceDynamic DNS Screen Data Dynamic DNS ScreenAdvanced Features Remote Management Remote ManagementData Remote Management Screen To connect from a remote PC via the InternetOverview Access ControlAccess Control Log To use this featureGroup Access Control ScreenData Access Control Screen Access RightsServices Group Members Group Members ScreenAdd New Service Services ScreenData Services Screen Available ServicesTo perform the Firmware Upgrade Firmware UpgradePrinter Advanced ConfigurationNetwork Clients Known PCs Network Clients ScreenData Network Clients Screen Network ClientsGenerate Report UPnP Backup DNSOptions Data Options ScreenAllow Internet access to be disabled Data MAC address Screen MAC AddressMAC Address Screen Restarted Static Routing Table Using this ScreenRouting Routing ScreenStatic Routing Data Routing ScreenOther Routers on the Local LAN Configuring Other Routers on your LANLocal Router Entry 1 Segment For Router As Default RouteFor Router Bs Default Route Static Routing ExampleFirewall SecurityData Security Screen Icmp ping Icmp PingRespond to Internet Access TroubleshootingGeneral Problems Appendix a Troubleshooting Wireless Interface SpecificationsSpeedStream Powerline Wireless Router FCC Radiation Exposure Statement FCC StatementTechnical Support