Toshiba USB001Z instruction manual Specifications, Warranty

Page 17

E6581299c

6. Specifications

Item

Specifications

Model number

USB001Z

 

Model with either an RS485 (2-wire type) connector or a common serial connector

Applicable model

(optional).

 

Usable applications: PCM001Z (V013 or successor), PCS001Z (V001 or successor)

 

 

Applicable OS

Windows 98 SE , Windows 2000, Windows XP SP1 *1

However, the personal computer *2 must have a USB port (series A).

 

Indoor operation at an altitude of 1,000m or less and free from direct sunlight,

Use environments

potentially corrosive or explosive gases, steam, dust particles, dust/dirt, and

 

machining fluids (grinding liquid, coolant, included)

Ambient temperature

0 to +50°C

Storage temperature

-25 to +65°C

Relative humidity

20 to 93% (free from condensation and vapor)

Vibration

5.9m/s2 (0.6G) or less (10 to 55Hz) (Compliant with JIS C 0040)

Cooling method

Self-cooling

*1: Windows® is listed above as the abbreviation for a Microsoft® Windows® operating system. Microsoft® and Windows® are registered trademarks or trademarks of the US Microsoft Corporation in the USA and other countries.

*2: No warranty as to the suitability of this product for any computer and any peripheral equipment is either made or implied.

7. Warranty

Any part of the unit that proves defective will be repaired free of charge under the following conditions:

1.This product will be repaired free of charge, if some trouble occurs under normal handling within one year of delivery and is caused obviously by a defect in design or workmanship.

2.The warranty applies only to the delivered unit.

3.For the following kinds of failure or damage, the repair cost shall be borne by the customer even within the warranty period.

1)Failure or damage caused by improper or incorrect use or handling, or unauthorized repair or modification of the inverter

2)Failure or damage caused by the unit falling or an accident during transportation after the purchase

3)Failure or damage caused by fire, salty water or wind, corrosive gas, earthquake, storm or flood, lightning, abnormal voltage supply, or other natural disasters

4)Damage due to the use of the USB-serial communication conversion unit for non-intended purposes.

4.If there are any warranty conditions otherwise provided for, those conditions will govern.

- 16E -

Image 17
Contents USB001Z USB Introduction„ Transportation & installation Read first Safety precautions„ Limits in purpose „ General Operation„ Operations „ Cautions in using the unit„ Disposal „ Caution in creating a software programUSB Exterior featuresWindows 2000 or Windows XP Installing the device driverInstallation of the device driver starts Installation of the device driver is now complete Complete the installation Specify a way to search for the driver Windows 98 SESearch for the driver file is made automatically. Click Next Insert the supplied floppy disk in the floppy disk driveUninstalling the device driver Click the Hardware tab of the System Properties dialog box Checking the COM port numberE6581299c VF-AS1 Connecting and starting the USB001Z unitOutline drawing Warranty Specifications