Toshiba USB001Z instruction manual Windows 98 SE, Specify a way to search for the driver

Page 10

E6581299c

2.2.Windows 98 SE

(1)Turn on your computer and start Windows.

(2)Connect the USB001Z unit to the computer with a USB cable.

* At this time, do not connect the USB001Z unit to the inverter.

After a while, the “@Add New Hardware Wizard” appears on the screen of your computer monitor, as shown in the figure below. Then, click [Next].

(3)Specify a way to search for the driver.

Click the checkbox for “@Search for the best driver for your device (Recommended)” in the window, make sure a check mark is put in the checkbox, and then click [Next].

- 9 -

Image 10

Contents USB001Z Introduction USB„ Limits in purpose Read first Safety precautions„ Transportation & installation „ General Operation„ Disposal „ Cautions in using the unit„ Operations „ Caution in creating a software programExterior features USBInstalling the device driver Windows 2000 or Windows XPInstallation of the device driver starts Installation of the device driver is now complete Complete the installation Windows 98 SE Specify a way to search for the driverInsert the supplied floppy disk in the floppy disk drive Search for the driver file is made automatically. Click NextUninstalling the device driver Checking the COM port number Click the Hardware tab of the System Properties dialog boxE6581299c Connecting and starting the USB001Z unit VF-AS1Outline drawing Specifications Warranty