Toshiba USB001Z instruction manual Checking the COM port number

Page 13

E6581299c

3. Checking the COM port number

The COM port number is needed for communications with the inverter. So, follow these steps to check on it.

The COM port number is recognized automatically when the installation of the device driver is completed. COM port numbers vary depending on how your computer is set up.

*Perform this check with the USB001Z unit connected to your computer, or else the port number cannot be checked.

(1)Click “Start” button on Windows, RIGHT-click “My Computer,” and select “Properties” from the menu that appears.

(In the case of Windows 2000 and Windows 98 SE, the “My Computer” folder is placed on the desktop.)

(2)Click the “Hardware” tab of the “System Properties” dialog box.

(If you are using Windows 98 SE, click the “Device Manager” tab and go to step (4).)

- 12 -

Page 12 Page 14
Image 13
Page 12 Page 14
Contents USB001Z USB Introduction„ Transportation & installation Read first Safety precautions„ Limits in purpose „ General Operation„ Operations „ Cautions in using the unit„ Disposal „ Caution in creating a software programUSB Exterior featuresWindows 2000 or Windows XP Installing the device driverInstallation of the device driver starts Installation of the device driver is now complete Complete the installation Specify a way to search for the driver Windows 98 SESearch for the driver file is made automatically. Click Next Insert the supplied floppy disk in the floppy disk driveUninstalling the device driver Click the Hardware tab of the System Properties dialog box Checking the COM port numberE6581299c VF-AS1 Connecting and starting the USB001Z unitOutline drawing Warranty Specifications
Top Page Image Contents