Toshiba USB001Z Read first Safety precautions, „ Limits in purpose, „ General Operation

Page 3

E6581299c

Read first

Safety precautions

This instruction manual and the inverter unit contain important information to avoid endangering actual operators and other persons and damaging properties and to ensure the proper and safe product usage.

Before reading this manual, fully understand the safety precautions in the instruction manual accompanying your inverter. Also, strictly observe the precautions described in this manual.

„Limits in purpose

Never use the USB-to-serial conversion unit with any device other than a TOSVERT series inverter, or it could cause an accident.

„General Operation

 

 

 

Danger

 

 

 

Never disassemble, modify or repair.

 

 

 

Disassembly

This can result in electric shock, fire and injury. For repairs, call your sales agency.

prohibited

 

 

 

 

Don’t place or insert any kind of object into the inverter (electrical wire cuttings, rods,

Prohibited

wires). This can result in electric shock or fire.

That may result in electric shock or fire.

 

 

 

 

 

 

Do not allow water or any other fluid to come in contact with this unit. Do not wipe this unit

 

 

 

with a wet cloth. That may result in electric shock or fire.

 

 

 

Before attempting any wiring steps, power off your inverter and make sure that the inverter

Mandatory

charge lamp is no longer lit.

If this unit begins to emit smoke or an unusual odor, or unusual sounds, immediately turn

 

 

 

 

 

 

power off.

 

 

 

If the equipment is continued in operation in such a state, the result may be fire. Call your

 

 

 

local sales agency for repairs.

„Transportation & installation

Danger

 

Do not place any inflammable substances near this unit.

Prohibited

If an accident occurs in which flame is emitted, this could lead to fire.

Do not connect a LAN cable or modular cable for telephones to the conversion unit. Doing

 

 

so could cause a failure or accident.

 

Do not connect more than one conversion unit to one host device (computer). Doing so

 

could cause a failure or accident.

 

Operate under the environmental conditions prescribed in the instruction manual.

Mandatory

Operations under any other conditions may result in malfunction.

Provide your inverter or other equipment with safety devices to prevent a serious accident

 

 

from resulting even if the unit malfunctions or fails to operate. Usage without a safety

 

device can result in an accident.

 

Use the Toshiba-specified cable for connecting this optional unit. (Refer to page 4.)

 

The use of any other option may result in an accident.

- 2 -

Image 3
Contents USB001Z USB Introduction„ General Operation Read first Safety precautions„ Transportation & installation „ Limits in purpose„ Caution in creating a software program „ Cautions in using the unit„ Operations „ DisposalUSB Exterior featuresWindows 2000 or Windows XP Installing the device driverInstallation of the device driver starts Installation of the device driver is now complete Complete the installation Specify a way to search for the driver Windows 98 SESearch for the driver file is made automatically. Click Next Insert the supplied floppy disk in the floppy disk driveUninstalling the device driver Click the Hardware tab of the System Properties dialog box Checking the COM port numberE6581299c VF-AS1 Connecting and starting the USB001Z unitOutline drawing Warranty Specifications