Toshiba USB001Z instruction manual Complete the installation

Page 9

E6581299c

(8)Complete the installation.

When a window appears, telling you that the driver has been installed successfully, click [Finish] to complete the installation. Eject the floppy disk, put it in its case, and store it along with this instruction manual.

The COM port number is needed for communications with the inverter. So, check on the COM number, following the steps described in section 3.

- 8 -

Image 9

Contents USB001Z USB Introduction„ Transportation & installation Read first Safety precautions„ Limits in purpose „ General Operation„ Operations „ Cautions in using the unit„ Disposal „ Caution in creating a software programUSB Exterior featuresWindows 2000 or Windows XP Installing the device driverInstallation of the device driver starts Installation of the device driver is now complete Complete the installation Specify a way to search for the driver Windows 98 SESearch for the driver file is made automatically. Click Next Insert the supplied floppy disk in the floppy disk driveUninstalling the device driver Click the Hardware tab of the System Properties dialog box Checking the COM port numberE6581299c VF-AS1 Connecting and starting the USB001Z unitOutline drawing Warranty Specifications