Toshiba TDP-P7 Input the password using the number buttons 1 to, Canceling the password

Page 32

General Operation

If the password input display appears when the power is turned on

When a password has been registered, the “Password” input window appears on the projected image when the power is turned on. The projector continues projecting this image until the correct password is input. At this time, only the STANDBY button (power off) works. Use the procedure described below to input the registered password. For instructions on registering the password, see E-30.

Input the password using the number buttons (1 to 4).

Be sure to input the registered 4-digit number.

Example: To input the password “2441”

Press number button “2”. An “*” (asterisk) appears at the first place.

Next press number buttons “4”, “4” and “1” in that order. Asterisks appear in all

 

four places.

[Password input window]

If the password matches, the window turns off and the projector can be used

 

normally.

 

Canceling the password/Changing the password

The password is canceled and changed using the menus. For instructions on operating the menus, see “Menu Operation Method” on E-33.

Canceling the password

Select “Security Lock” in the “Option” menu and set it to “Disable”.

This clears the password and disables the security lock.

The password input display no longer appears when the power is turned on.

Changing the password

After setting “Security Lock” to “Disable” as described above, set it back to “En- able”. The menu closes and the password registration display appears. Register the new password. See “Registering the password” on E-30.

E-31

Image 32
Contents TDP-P7 Declaration of Conformity DOC Compliance NoticeDo not look at the laser pointer’s light source PrecautionsThis label is located on the side of the remote control Installation Power SupplyCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Names of the Main Unit Parts Built-in Security SlotZoom ring E-22 Built-in security slotRemote control sensor E-11 Names of the Main Unit PartsNames of Parts/Preparing the Remote Control Unit Names of the Remote Control PartsPreparing the Remote Control Remote Control RangeInserting the Batteries Side ViewProcedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerManufacturer Model Key To Output the External Output Signal of a Notebook ComputerConnecting Personal Computers and Video Equipment Connections with Composite Signals Video Equipment with Video ConnectorsVideo Equipment with S-VIDEO Connectors Video cable Mini DIN 4-pin plug Commercially availableConnections with Component Signals Connections with the Audio Jack Switch on the projector power OperatingPower Cable Connections and Switching the Power On/Off Press the Enter button to setThis completes the selection of the display language CursorButton on main unit Unplug the power cableFinishing Adjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringMaking Adjustments with the Adjusters Adjuster buttonFocus ring Raising the projection imageAutomatic Adjustment When Auto Source is OnWhen Auto Source is Off General OperationCancelling Video and Audio Temporarily Adjustment of the VolumePress the Cancel button to immediately close the display Freezing a Moving PicturePress the Zoom button to enlarge the image Enlargement of the Image and Video MovementImage can also be moved in the following circumstances Using the Presentation Timer Using the Laser Pointer OperationConnecting the computer and projector Click button on backJOG buttons Click buttonProtecting the Projector with the Security Lock Input the password using the number buttons 1 to Canceling the password/Changing the passwordCanceling the password Changing the passwordUsing the Quick Menu Content of Adjustments and SettingsPress the Select or button to adjust Example Brightness adjustment displayMenu Operation Method Names and Functions of Buttons Used for Menu OperationsAdjustment Bar and Settings Contents Menu Screen Names and FunctionsMenu Operation Method Menu Name Cursor Deep BluePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewInfo Menu name Item Name Sub Menu SetupOption Picture Adj. Picture Adjustment ImageBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionReset Fine PicturePosition ImageSelect the preset color mode ColorQuick Color Adj GammaSelection contents at the time of YPbPr input Color TempWhite Color SpaceWhite Balance Personal Computer Signal Video SignalsView AspectVertical Flip / Horizontal Flip KeystoneKeystone Save ViewAuto Source SetupAuto Power Off Lamp Mode SetupStatus Indicator Menu PositionPresentation Timer To start the timerInput Format Video and S-VideoOption LanguageOn Screen BackgroundOption Startup ScreenSecurity Lock Factory Default Lamp Timer ResetInfo StatusInfo Resolution / FrequencyLamp Timer When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning Cleaning a Soiled Projector Main UnitCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the lamp cover Reset the Lamp TimerMount the new lamp cartridge Specifications OpticalElectrical MechanicalTable of Supported Frequency SignalResolution Frequency Video Cabinet Dimensions