Toshiba TDP-P7 owner manual Reset, Fine Picture, Position, Image

Page 42

Image

Fine Picture

Adjust this when the picture shows a lack of color fidelity or flickering.

Select the “Fine Picture” item name and adjust with the SELECT buttons so that the lack of color fidelity or the flickering disappears.

H Position

Adjust this when the picture is shifted to the left or right.

Select the “H Position” item name and adjust with the SELECT buttons.

V Position

Adjust this when the picture is shifted up or down.

Select the “V Position” item name and adjust with the SELECT buttons.

Reset

This function resets (i.e., returns to the standard settings) the adjust- ment/setting value of the “Image” menu name.

A press of the ENTER button forces the reset.

Note:

*The item name “Fine Picture” at the time of RGB input will not be reset.

*“Reset” of the menu name “Image” can be reset for each input source.

*To reset the adjustments/settings of all the menu items (while noting that there are some items that cannot be reset), see “Factory Default” on Page E-52.

E-41

Image 42

Contents TDP-P7 Declaration of Conformity DOC Compliance NoticePrecautions This label is located on the side of the remote controlDo not look at the laser pointer’s light source Cleaning InstallationPower Supply Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Zoom ring E-22 Names of the Main Unit PartsBuilt-in Security Slot Built-in security slotRemote control sensor E-11 Names of the Main Unit PartsNames of Parts/Preparing the Remote Control Unit Names of the Remote Control PartsInserting the Batteries Preparing the Remote ControlRemote Control Range Side ViewProcedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerTo Output the External Output Signal of a Notebook Computer Connecting Personal Computers and Video EquipmentManufacturer Model Key Video Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with Video Connectors Video cable Mini DIN 4-pin plug Commercially availableConnections with Component Signals Connections with the Audio Jack Switch on the projector power OperatingThis completes the selection of the display language Power Cable Connections and Switching the Power On/OffPress the Enter button to set CursorUnplug the power cable FinishingButton on main unit Adjust the projection image to the screen Adjustment of the Projection ScreenAdjustment of the Projection Screen Zoom ringFocus ring Making Adjustments with the AdjustersAdjuster button Raising the projection imageWhen Auto Source is Off Automatic AdjustmentWhen Auto Source is On General OperationPress the Cancel button to immediately close the display Cancelling Video and Audio TemporarilyAdjustment of the Volume Freezing a Moving PictureEnlargement of the Image and Video Movement Image can also be moved in the following circumstancesPress the Zoom button to enlarge the image Using the Presentation Timer Using the Laser Pointer OperationJOG buttons Connecting the computer and projectorClick button on back Click buttonProtecting the Projector with the Security Lock Canceling the password Input the password using the number buttons 1 toCanceling the password/Changing the password Changing the passwordPress the Select or button to adjust Using the Quick MenuContent of Adjustments and Settings Example Brightness adjustment displayMenu Operation Method Names and Functions of Buttons Used for Menu OperationsMenu Operation Method Adjustment Bar and Settings ContentsMenu Screen Names and Functions Menu Name Cursor Deep BluePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewMenu name Item Name Sub Menu Setup OptionInfo Brightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentImage Picture Adj. / Fine Picture / H Position / V PositionPosition ResetFine Picture ImageQuick Color Adj Select the preset color modeColor GammaWhite Selection contents at the time of YPbPr inputColor Temp Color SpaceWhite Balance View Personal Computer SignalVideo Signals AspectKeystone Save Vertical Flip / Horizontal FlipKeystone ViewSetup Auto Power OffAuto Source Status Indicator Lamp ModeSetup Menu PositionInput Format Presentation TimerTo start the timer Video and S-VideoOn Screen OptionLanguage BackgroundStartup Screen Security LockOption Info Factory DefaultLamp Timer Reset StatusResolution / Frequency Lamp TimerInfo When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeReset the Lamp Timer Mount the new lamp cartridgeMount the lamp cover Electrical SpecificationsOptical MechanicalSignal Resolution Frequency VideoTable of Supported Frequency Cabinet Dimensions