Toshiba TDP-P7 Input Format, Presentation Timer, Video and S-Video, To start the timer

Page 50

Setup

Input Format

This function is used in setting the input signals of the input connec- tors.

Normally, this should be set to Auto. When identification is not possible with Auto, make the setting.

Select the item name “Input Format”, press the ENTER button, and the sub menu will open.

Select the connector that is to be changed, and select the setting contents with the SELECT buttons.

[RGB]

This is the signal setting for the RGB connector.

Auto	Automatically identifies the signal.
RGB	Analog RGB signal is set.

Component . Component signal is set.

[Video] and [S-Video]

[Video] is the color system setting for the VIDEO connector and [S-Video] is the color system setting for the S-VIDEO connector.

Auto	Automatic identification.
NTSC	Fixed to the NTSC system.
NTSC 4.43 ..	Fixed to the NTSC 4.43 system.
PAL	Fixed to the PAL system.
PAL M	Fixed to the PAL M system.
PAL N	Fixed to the PAL N system.
PAL 60	Fixed to the PAL 60 system.
SECAM	Fixed to the SECAM system.

Presentation Timer

The presentation is given while checking the timer displayed on the screen.

The gauge display allows the remaining time to be known at a glance.

Select the item name “Presentation Timer” and select the setting contents with the SELECT buttons.

Setting contents: Off, 10 min. , 20 min. , 30 min. , 40 min. , 50 min. , 60 min.

To start the timer...

Press the MENU button and open the menu.

The timer display will appear at the lower right and the timer will start. See “Using the Presentation Timer” on Page E-29 for details.

E-49

Image 50

Contents TDP-P7 Declaration of Conformity DOC Compliance NoticeDo not look at the laser pointer’s light source PrecautionsThis label is located on the side of the remote control Cleaning InstallationPower Supply Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Zoom ring E-22 Names of the Main Unit PartsBuilt-in Security Slot Built-in security slotRemote control sensor E-11 Names of the Main Unit PartsNames of Parts/Preparing the Remote Control Unit Names of the Remote Control PartsInserting the Batteries Preparing the Remote ControlRemote Control Range Side ViewProcedure Up to Projecting to the Screen Placement Guide Screen Size and Projection DistancePersonal computer RGB signal cable Supplied item Connections with Personal ComputerManufacturer Model Key To Output the External Output Signal of a Notebook ComputerConnecting Personal Computers and Video Equipment Video Equipment with S-VIDEO Connectors Connections with Composite SignalsVideo Equipment with Video Connectors Video cable Mini DIN 4-pin plug Commercially availableConnections with Component Signals Connections with the Audio Jack Switch on the projector power OperatingThis completes the selection of the display language Power Cable Connections and Switching the Power On/OffPress the Enter button to set CursorButton on main unit Unplug the power cableFinishing Adjust the projection image to the screen Adjustment of the Projection ScreenAdjustment of the Projection Screen Zoom ringFocus ring Making Adjustments with the AdjustersAdjuster button Raising the projection imageWhen Auto Source is Off Automatic AdjustmentWhen Auto Source is On General OperationPress the Cancel button to immediately close the display Cancelling Video and Audio TemporarilyAdjustment of the Volume Freezing a Moving PicturePress the Zoom button to enlarge the image Enlargement of the Image and Video MovementImage can also be moved in the following circumstances Using the Presentation Timer Using the Laser Pointer OperationJOG buttons Connecting the computer and projectorClick button on back Click buttonProtecting the Projector with the Security Lock Canceling the password Input the password using the number buttons 1 toCanceling the password/Changing the password Changing the passwordPress the Select or button to adjust Using the Quick MenuContent of Adjustments and Settings Example Brightness adjustment displayMenu Operation Method Names and Functions of Buttons Used for Menu OperationsMenu Operation Method Adjustment Bar and Settings ContentsMenu Screen Names and Functions Menu Name Cursor Deep BluePerforming Menu Operations Menu Display Press the Menu button to display the menuMaking Adjustments/Settings Sub menuSelecting Another Menu Name with Remote Control Operation Color ViewInfo Menu name Item Name Sub Menu SetupOption Brightness / Contrast / Color / Tint / Sharpness Picture Adj. Picture AdjustmentImage Picture Adj. / Fine Picture / H Position / V PositionPosition ResetFine Picture ImageQuick Color Adj Select the preset color modeColor GammaWhite Selection contents at the time of YPbPr inputColor Temp Color SpaceWhite Balance View Personal Computer SignalVideo Signals AspectKeystone Save Vertical Flip / Horizontal FlipKeystone ViewAuto Source SetupAuto Power Off Status Indicator Lamp ModeSetup Menu PositionInput Format Presentation TimerTo start the timer Video and S-VideoOn Screen OptionLanguage BackgroundOption Startup ScreenSecurity Lock Info Factory DefaultLamp Timer Reset StatusInfo Resolution / FrequencyLamp Timer When an Indicator is Lit or Flashing Thermal ProtectorTroubleshooting Check the following matters before requesting servicingCleaning the Inside of the Projector CleaningCleaning a Soiled Projector Main Unit Dirty LensReplacing the Lamp Cartridge Replacing the Lamp Cartridge Remove the lamp cartridgeMount the lamp cover Reset the Lamp TimerMount the new lamp cartridge Electrical SpecificationsOptical MechanicalTable of Supported Frequency SignalResolution Frequency Video Cabinet Dimensions