Toshiba TDP-P7 owner manual Specifications, Optical, Electrical, Mechanical

Page 61

Specifications

ModelTDP-P7

Optical

Method of projection :	DLP™ (single chip DMD)
DMD	0.7 inches 1024×768 dots
Lamp	120 W high pressure mercury lamp
Projection lens :	Manual zoom (×1.2), Manual focus F = 2.6 – 2.9, f = 27.5 –	33.0 mm
Image size	Minimum 26 inch (at projection distance of 1.20 m / 3.9 feet	telephoto)
	Maximum 300 inch (at projection distance of 11.81 m / 38.76 feet wide)
Light Output	Standard mode: 1100 lm
Contrast Ratio	2000:1 (Full on/off)

Electrical

Inputs	Video (NTSC3.58/NTSC4.43/PAL/PAL-N/PAL-M/PAL60/SECAM/YCbCr(NTSC, PAL)/
	YPbPr(480p, 576p, 1080i, 720p)): (automatic or manual switching)
	RGB (Horizontal :15 to 80 kHz, Vertical 50 to 85 Hz)
Color Reproduction	Full color (16,770,000 colors)
Resolution	VGA (640×480) expansion/true, S-VGA (800×600) expansion/true
	XGA (1024×768) true, S-XGA (1280×1024) compression
Input Current	1.8 A
Power Requirement	100 - 240 V AC, 50/60 Hz
Power Consumption	180 watts (160 watts in eco mode)

Mechanical

Dimensions Excluding Stand	186 mm (W)×46 mm (H)×176 mm (D) (when stored, not including projecting parts)
	7.3 in.(W)×1.8 in.(H)×6.9 in.(D) (when stored, not including projecting parts)
Weight	Approximately 1.3 kg / 2.9 lbs
Operational Temperatures	Data projector: 5° to 35°C (41° to 95°F), 30 to 85% humidity

• Specifications and design are subject to change without notice.

E-60

Image 61

Contents TDP-P7 DOC Compliance Notice Declaration of ConformityThis label is located on the side of the remote control PrecautionsDo not look at the laser pointer’s light source Power Supply InstallationCleaning Lamp ReplacementMajor Features Table of Contents Table of Contents Checking the Supplied Accessories Built-in Security Slot Names of the Main Unit PartsZoom ring E-22 Built-in security slotNames of the Main Unit Parts Remote control sensor E-11Names of the Remote Control Parts Names of Parts/Preparing the Remote Control UnitRemote Control Range Preparing the Remote ControlInserting the Batteries Side ViewProcedure Up to Projecting to the Screen Screen Size and Projection Distance Placement GuideConnections with Personal Computer Personal computer RGB signal cable Supplied itemConnecting Personal Computers and Video Equipment To Output the External Output Signal of a Notebook ComputerManufacturer Model Key Video Equipment with Video Connectors Connections with Composite SignalsVideo Equipment with S-VIDEO Connectors Video cable Mini DIN 4-pin plug Commercially availableConnections with Component Signals Connections with the Audio Jack Operating Switch on the projector powerPress the Enter button to set Power Cable Connections and Switching the Power On/OffThis completes the selection of the display language CursorFinishing Unplug the power cableButton on main unit Adjustment of the Projection Screen Adjustment of the Projection ScreenAdjust the projection image to the screen Zoom ringAdjuster button Making Adjustments with the AdjustersFocus ring Raising the projection imageWhen Auto Source is On Automatic AdjustmentWhen Auto Source is Off General OperationAdjustment of the Volume Cancelling Video and Audio TemporarilyPress the Cancel button to immediately close the display Freezing a Moving PictureImage can also be moved in the following circumstances Enlargement of the Image and Video MovementPress the Zoom button to enlarge the image Using the Presentation Timer Operation Using the Laser PointerClick button on back Connecting the computer and projectorJOG buttons Click buttonProtecting the Projector with the Security Lock Canceling the password/Changing the password Input the password using the number buttons 1 toCanceling the password Changing the passwordContent of Adjustments and Settings Using the Quick MenuPress the Select or button to adjust Example Brightness adjustment displayNames and Functions of Buttons Used for Menu Operations Menu Operation MethodMenu Screen Names and Functions Adjustment Bar and Settings ContentsMenu Operation Method Menu Name Cursor Deep BlueMenu Display Press the Menu button to display the menu Performing Menu OperationsSub menu Making Adjustments/SettingsSelecting Another Menu Name with Remote Control Operation View ColorOption Menu name Item Name Sub Menu SetupInfo Image Picture Adj. Picture AdjustmentBrightness / Contrast / Color / Tint / Sharpness Picture Adj. / Fine Picture / H Position / V PositionFine Picture ResetPosition ImageColor Select the preset color modeQuick Color Adj GammaColor Temp Selection contents at the time of YPbPr inputWhite Color SpaceWhite Balance Video Signals Personal Computer SignalView AspectKeystone Vertical Flip / Horizontal FlipKeystone Save ViewAuto Power Off SetupAuto Source Setup Lamp ModeStatus Indicator Menu PositionTo start the timer Presentation TimerInput Format Video and S-VideoLanguage OptionOn Screen BackgroundSecurity Lock Startup ScreenOption Lamp Timer Reset Factory DefaultInfo StatusLamp Timer Resolution / FrequencyInfo Thermal Protector When an Indicator is Lit or FlashingCheck the following matters before requesting servicing TroubleshootingCleaning a Soiled Projector Main Unit CleaningCleaning the Inside of the Projector Dirty LensReplacing the Lamp Cartridge Remove the lamp cartridge Replacing the Lamp CartridgeMount the new lamp cartridge Reset the Lamp TimerMount the lamp cover Optical SpecificationsElectrical MechanicalResolution Frequency Video SignalTable of Supported Frequency Cabinet Dimensions