Toshiba TDP-PX10 owner manual Used Lamps

Page 44

Lamp replacement (Continued)

Notes and Precautions

•The [Lamp time] item in the Status display menu indicates the time of lamp use (as a rough guide). p.37

•It is recommended that the lamp be replaced after 2,000 hours of use. When [Lamp time]!reaches 2,000 hours, a message will appear. (After 2,000 hours, the message will appear when the power is first turned on after each 100 hour period of use.) This!display disappears when you press the [MENU] button.

•Attach the lamp cover correctly so that it is not loose. If it is not attached correctly,!the projector may fail to be powered on or the lamp may fail to come on.

•Always replace the lamp with a new one.

•The lamp is made out of glass. Do not touch the glass surface with your bare hands, bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector's lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose of them in accordance with local regulations.

44

Image 44

Contents TDP-PX10 Data Projector Safety Precautions Model Name TDP-PX10!USA onlyBefore Using Important Safety Instructions Power SourcesSource of Light VentilationPower cord protection CleaningHeat Water and MoistureImportant Safety Instructions Accessories Damage Requiring ServiceService ServicingDo not use the product in a closed installation location Replacement PartsSafety Check Important Precautions Place and Manner of InstallationMoisture Condensation Avoid Volatile LiquidExemption Clauses Other Information CopyrightsDisposal TrademarksRemote Control Batteries Before Using Contents Before calling service personnel OthersChecking the package contents Names of each part on the main unit Control panel Remote Control Control panelPreparations Service Label locations Parts on the rear panelPreparing and using the remote control „ Loading dry-cell batteries into Remote control„ Operating the remote control Remove the battery coverPreparing and using the remote control Dry-cell batteriesConnecting a computer Operating a computerPlacement Placement StylesProjection Distance and Size As seen from aboveBefore connection Connecting with computersConnection Connecting with AV equipment „ Removing the lens cover Turning the power on and off„ Turning the power on Press the ON/STANDBY button Press the ON/STANDBY button again „ Turning the power off Press the ON/STANDBY buttonPrecaution Basic operations Correcting the keystone distortion Using handy featuresUsing auto setting For computer input only Freezing the image Freeze Using handy features„ Press the Freeze button on the remote control Using the menus How to use the menusUsing the menus Image adjustment menuDisplay setting menu Display effectDefault setting menu LanguageDisplaying Information Status display Using USB Memory File View ModeSlideshow Mode / Display of movie files About USB memory function Using USB MemoryDisconnecting USB memory Folders and files USB memory resetBacking up the data About lamp Lamp replacement„ When the lamp is broken Lamp replacement Used Lamps „ Main unit cleaning Lens and main unit cleaning„ Lens cleaning Indicators LED Indicators State/ Problems Icon/ Messages Close MessagesBefore calling service personnel If This Happens Check No power„ Separately sold product Specifications„ List of general specifications „ List of supported signals RGB signals Compatibility Resolution Sync KHz Sync HzSignal Horizontal Frequency kHz Vertical Frequency Hz Specifications„ List of supported signals Component signals „ Pin assignment of Computer in terminals „ Pin assignment of S-VIDEO terminals