Toshiba TDP-P9 owner manual Default setting menu, Language

Using the menus (continued)

Default setting menu

Item	Description	RGB Y/PB/PR		Video	USB
Sets projection	mode in accordance with	Yes	Yes	Yes	Yes
Projection mode	p.24
Placement Styles.

(Standard) (Rear)

Language	Select one of the languages below for the menu					Yes	Yes	Yes	Yes
	and messages.
	[ : Enter setting mode] ￿[			:Selection]￿
	[ : Apply]
	English/ Français/ Deutsch/ Italiano/ Español/
	Português/ / Svenska/ Türkçe/ Polski/
	Dansk/ ština/ Magyar/ Nederlands/ Suomi/
	Norsk/ / Român			￿￿￿/
	/	)	*/ Bahasa Indonesia
Start-up screen	Display start-up screen when power is turned on.					Yes	Yes	Yes	Yes
	On	Off
Auto input search	Set whether the input with signals				is only	Yes	Yes	Yes	Yes
	selected or not.
	On	Off
Fan mode [Note]	Sets the cooling fan speed.					Yes	Yes	Yes	Yes
	Standard		High
Lamp power	Sets the lamp power.					Yes	Yes	Yes	Yes
	Normal		Low
Power on [Note]	Sets whether to turn on the power when the ON/					Yes	Yes	Yes	Yes
	STANDBY button is pressed (Manual), or when
	the power is supplied (Auto).
	Manual		Auto
Reset all	Press	. (The language is not reset.)				Yes	Yes	Yes	Yes
	Resets all adjustments and settings to their
	factory settings.
	Yes	No

Note

•Set Fan mode to [High] when the altitude is 600m (2,000 ft.) or higher, however, do not set Fan mode to [High] when using the projector at a lower altitude.

•Note that if [Power on] is set to [Auto], then if the power is supplied when restored after a power outage, the projector will come on.

36