Lamp replacement (Continued)
Unplug power cord.
Wait until lamp is sufficiently cooled.
Wait for at least 1 hour.
Remove the lamp cover.
Loosen the screw, raise the lamp! cover with your fingers as shown to remove the lamp cover. Use care to avoid any!damage to nails and/or tip of your finger(s). If! you have any difficulty in removal, you can use!a screwdriver or any other smaller tool for your!convenience.
Lamp cover
1
2
Pull out the lamp.
Loosen the two lamp locking screws, pull up the handle, and remove the lamp.
Mount the new lamp.
Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the two lamp locking screws.
Replace the lamp cover.
Align the cover, and press it in, then tighten the!screw loosened in step 
until the lamp cover is no longer loose. (Be sure to replace the lamp cover.)
Reset the lamp timer.
See the lamp's manual for instructions on resetting!the lamp timer.
Maintenance
43